Using Sequence:
1)Use #8,#10 SS file to negotiate the canal.
2)Use #12,#15,#19 M-Pat to set up a smooth path.
3)Use 30,8% orifice to pre-enlarge the upper canal.
4)Use 20,4%(Yellow),25,4%(Red),30,4%(blue) to prepare to working length.
5)Make sure rinse the canal by nacio,use the #15 to break the debris and then lubricate the canal with EDTA every time changing the files.
6)Use larger size files to finish the preparation depands on the anatomy.
Packing List:
5 files per pack
- 1)CM Wires technology.
- 2)Resistance to cyclic fatigue increased 400% compare to traditional NI-TI
- 3)4% Design for curved or complicated canal anatomy
- 4)Can be pre-bent and twisted will recover when heated over 60 Degree.
- Rotation Speed:450 RPM Torque:1.8 N/CM2
- 1)CM Wires technology.
- 2)Resistance to cyclic fatigue increased 400% compare to traditional NI-TI
- 3)4% Design for curved or complicated canal anatomy
- 4)Can be pre-bent and twisted will recover when heated over 60 Degree.
- Rotation Speed:450 RPM Torque:1.8 N/CM2
