The RuggedMade 13 GPM hydraulic pump is an excellent replacement pump for log splitters, hydraulic presses, snow plow power units and a variety of other agricultural power equipment. This two-stage gear pump provides faster cycle times with an over-all higher pressure rating, so you can squeeze every bit of power out of your equipment.
RuggedMade 13 GPM Hydraulic Pump Specs
- GPM: 13
- Type: Two Stage
- Input RPM: 3600
- Nominal Flow (GPM): 13
- Min. HP Required: 6.5
- Inlet Ports (In.): 1 Tube
- Outlet Ports (In.): 1/2 NPT
- Shaft OD (In.): 1/2
- Shaft Length (In.): 1-1/2
- Transmission: 2 Stage
- Displacement High Pressure (Cubic In./Rev.): 0.22
- Displacement Low Pressure (Cubic In./Rev.): 0.665
- Drive Shaft (In.): 1/2
- Max. PSI 1st Stage: 3000
- Max. PSI 2nd Stage: 900
- Unloading Valve Preset Pressure (PSI): 600 to 700
- Mounting Positions: Horizontal & Vertical
- Mounting Flange: 4 Bolt
- Rotation: Clockwise
- Hydraulic Fluid Type: AW-32 10-Weight (ISO 32) or AW-46 20-Weight (ISO 46)
- Note: Not designed for use with "universal" or "tractor" hydraulic fluid
- Note: Suction-side filtration should be no finer than 150 micron
Make sure hydraulic fluid reservoir is not below pump to ensure a sufficient flow of oil to the pump.
