RDEXP Electric Bike Scooters Brushless Motor Controller 36v 500w;

Note: It only fits for Motor with sensors.
Casing material: aluminium
Colour: silver
Short voltage protection
Electric current:30A
Voltage: 36V
Power:500W
Dimensions: 150mm x 85mm x 43mm (5.9 x 3.3 x 1.7 inch)
Weight:542g
Package included:
1 x motor controller

Connecting Instructions:
NO.1
Connect the motor 3 wires first
The motor line has no positive and negative poles. First connect the three thick yellow, green and blue lines of the motor and the three motor lines of the electric vehicle.
NO.2
Connect the positive and negative poles of the power supply and the electric door lock line
The power cord of the controller is thick red for the positive pole, thick black for the negative pole, and thin red for the electric door lock line. Note: Do not connect the positive and negative poles of the power supply.
NO.3
Connect to the learning line
There is a pair of white learning lines on the controller, connect the learning lines together, then turn on the power, see if the motor rotates automatically, and directly pull out the learning line, reverse the learning line and reconnect.
NO.4
Connect the Hall line
Plug in the Hall line, which is a head of 5 lines. Note: The Hall line has positive and negative poles. The positive line of our controller's Hall line is red and the negative pole is black.
NO.5
Connect the turn line
Find the controller's turn line, red green, black, red is the positive pole, black is the negative pole, green is the turn signal line. .
NO.6
Connecting brake lines and EABS functions