New DDR4 memory kit designed for Intel 6th Gen Core CPUs. Two matched 8GB modules, PC4-25600 specification operating at 3200MHz. Full timings of CL16 (16-18-18-38) at 1.35V, 288-pin memory modules. With Black Ripjaws V heatsinks.
- RipJaws V Series, designed specifically for AMD Ryzen X470, X570, B450, B550; Intel Z170, Z270 and newer.
- 16GB kit containing 2 x 8GB modules, DDR4-3200, 288-Pin, CAS Latency CL16 (16-18-18-38) at 1.35V (XMP)
- Brand: G.SKILL, Series: RipJaws V, Model: F4-3200C16D-16GVKB
- ECC: No, Dual Channel Kit, Recommended Use: High Performance or Gaming Memory
- XMP profile support to reach up to the rated overclock speed, or run at default JEDEC profile speed. Memory kits may boot to the SPD speed with default BIOS settings with compatible hardware. For memory kits with Intel XMP, enable XMP profile in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the rated XMP overclock speed and system stability will depend on the compatibility and capability of the motherboard and CPU used.
- Check G.Skill QVL or RAM Configurator on the G.Skill website for validated motherboards. Motherboards not listed may not be capable of EXPO or rated specifications.
- Rated XMP frequency & stability depends on MB & CPU capabilityDo not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Usage in any manner inconsistent with manufacturer specifications, warnings, designs, or recommendations will result lower speeds, system instability, or damage to the system or its components.
- RipJaws V Series, designed specifically for AMD Ryzen X470, X570, B450, B550; Intel Z170, Z270 and newer.
- 16GB kit containing 2 x 8GB modules, DDR4-3200, 288-Pin, CAS Latency CL16 (16-18-18-38) at 1.35V (XMP)
- Brand: G.SKILL, Series: RipJaws V, Model: F4-3200C16D-16GVKB
- ECC: No, Dual Channel Kit, Recommended Use: High Performance or Gaming Memory
- XMP profile support to reach up to the rated overclock speed, or run at default JEDEC profile speed. Memory kits may boot to the SPD speed with default BIOS settings with compatible hardware. For memory kits with Intel XMP, enable XMP profile in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the rated XMP overclock speed and system stability will depend on the compatibility and capability of the motherboard and CPU used.
- Check G.Skill QVL or RAM Configurator on the G.Skill website for validated motherboards. Motherboards not listed may not be capable of EXPO or rated specifications.
- Rated XMP frequency & stability depends on MB & CPU capabilityDo not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Usage in any manner inconsistent with manufacturer specifications, warnings, designs, or recommendations will result lower speeds, system instability, or damage to the system or its components.
