Designed specifically for separation of a vehicle's ball joint from the spindle support arm, the ABN Universal Ball Joint Separator - Remover Tool for Separating Arms, Tie Rods, and Ball Joints on Cars, Trucks, ATVs offers q...

Buy Now From Amazon

Designed specifically for separation of a vehicle's ball joint from the spindle support arm, the ABN Universal Ball Joint Separator - Remover Tool for Separating Arms, Tie Rods, and Ball Joints on Cars, Trucks, ATVs offers quick and easy operation. It is a universal tool that fits American and European cars, trucks, and even ATVs. Constructed from cast steel with a hardened steel pivot pin and jackscrew, this scissors-type tool can be used in the shop regularly and perfectly removes tie rod ends and lower ball joints without damaging the grease boots. It has a 9/10" adjustable height and can be adjusted to 2 sizes for wider working areas and to accommodate various sizes and vehicles. The 1-1/8" and 2-1/8" maximum opening capacity accepts 3/4" sockets or wrenches with a 4/5" fork opening. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Practical: The ABN Universal Ball Joint Separator – Remover Tool for Separating Arms, Tie Rods, and Ball Joints on Cars, Trucks, ATVs is designed specifically for quick and easy separation of a vehicle’s ball joint from the spindle support arm
  • Versatile: Universal; For use on both American domestic and European imported/foreign vehicles; For cars, trucks, and even ATVs
  • Durable: Constructed from commercial-strength cast steel with hardened steel pivot pin and jackscrew for regular shop use
  • Easy to Use: Slip the forked end between the boot and metal attachment point, be sure the pivot finger is squarely on the threaded end, and tightening the bolt until you have a good amount of resistance; Tap the attachment point and or the finger with a hammer and tighten some more and tap again; When the stud comes loose, it will be all at once as the tool falls free and you will hear a “pop”
  • Specifications: 1-1/8" and 2-1/8" (30mm and 56mm) maximum opening capacity; Accepts 3/4" sockets or wrenches; 4/5" (20mm) fork opening; 9/10” (48mm) adjustable height; Can be adjusted to 2 sizes for wider working areas and to accommodate various sizes and vehicles; Scissors-type design
  • Practical: The ABN Universal Ball Joint Separator – Remover Tool for Separating Arms, Tie Rods, and Ball Joints on Cars, Trucks, ATVs is designed specifically for quick and easy separation of a vehicle’s ball joint from the spindle support arm
  • Versatile: Universal; For use on both American domestic and European imported/foreign vehicles; For cars, trucks, and even ATVs
  • Durable: Constructed from commercial-strength cast steel with hardened steel pivot pin and jackscrew for regular shop use
  • Easy to Use: Slip the forked end between the boot and metal attachment point, be sure the pivot finger is squarely on the threaded end, and tightening the bolt until you have a good amount of resistance; Tap the attachment point and or the finger with a hammer and tighten some more and tap again; When the stud comes loose, it will be all at once as the tool falls free and you will hear a “pop”
  • Specifications: 1-1/8" and 2-1/8" (30mm and 56mm) maximum opening capacity; Accepts 3/4" sockets or wrenches; 4/5" (20mm) fork opening; 9/10” (48mm) adjustable height; Can be adjusted to 2 sizes for wider working areas and to accommodate various sizes and vehicles; Scissors-type design

Similar Products

OEMTOOLS 25202  Ball Joint SeparatorOrionMotorTech Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light TrucksABN Axle Nut Socket, 30mm, 1/2in Drive, 12 Point - Universal for All Vehicle 12pt Installation, Removal, RepairOrionMotorTech Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4wd Adapters, for Most 2WD and 4WD Cars and Light Trucks (BK)ABN Axle & Front Wheel Hub Puller - Flange Type Tool 3-3/4 to 4-1/2 Inches Power Steering Pulley Remover Hub GrapplerOrionMotorTech 23-Piece FWD Front Wheel Drive Bearing Adapters Puller Press Replacement Installer Removal Tool KitABN Ball Joint Press Tool Set - 10Pc Ball Joint Remover Tool Ball Joint Press Kit Service Tool Kit with AdaptersPickle Fork Tool Set - Includes Tie Rod Tool, Ball Joint Separator, Pitman Arm Wedge (3 Piece Pickle Fork Set)