CURT 25138 Straight-Tongue Trailer Coupler for 3-Inch Channel Accepts 2 Hitch Ball, 3,500 lbs

Easily build your own axle with this 2,000 lb rated hub assembly. This kit includes (1) - 5-Bolt on 4-1/2 inch bolt center hubs for 2,000 lb axle, (1) - 1" straight spindle, (1) castle nut, (1) cotter pin, (5) 1/2-20 lug nuts, (1) 1.987 O.D - 1.249 I.D grease seals, (2) L-44643 1" I.D inner/outer bearings and (2) 1.986 O.D - 1.16" depth, dust caps. PLEASE NOTE: Fabricating an axle requires the proper equipment needed to apply a weld. If you are uncomfortable with your welding capabilities, this project should be handled by a qualified welder.

1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
Spindle includes spindle nut, spindle washer, and cotter pin.
5-4.5" BT8 hub pre raced and studded.
Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
Spindle includes spindle nut, spindle washer, and cotter pin.
5-4.5" BT8 hub pre raced and studded.
Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.

Top WaffleMaker Reviews

Southwest Wheel 2,000 lbs Trailer Axle Spindle with 5-4.5" Bolt Circle Hub;