SoftSand Rubber particles are developed for non-skid coatings. The particles can be used with any paint. They can be added directly to the paint (1/4 pint per quart of paint or 1 pint per gallon of paint) and brushed, rolled or sprayed. The particles can also be manually sprinkled (broadcast) onto a wet coat of paint. Allow this to dry, remove the excess particles, and then apply 1 or 2 coats over the particles.
- SoftSand rubber particles are ideal for non-skid coatings especially on boats, pools, patios, agility equipment and other areas exposed to bare feet, bathing suits, paws, etc.
- SoftSand particles can be used with any paint - 1 and 2 part urethanes, acrylics, enamels, epoxies, etc.
- rubber particles are designed to adhere to the coating system so they won't pop out as the coating wears like sand or other hard additives
- 1/4 pint bag is designed to be mixed with a quart of paint
- Softer feel and better performance
- SoftSand rubber particles are ideal for non-skid coatings especially on boats, pools, patios, agility equipment and other areas exposed to bare feet, bathing suits, paws, etc.
- SoftSand particles can be used with any paint - 1 and 2 part urethanes, acrylics, enamels, epoxies, etc.
- rubber particles are designed to adhere to the coating system so they won't pop out as the coating wears like sand or other hard additives
- 1/4 pint bag is designed to be mixed with a quart of paint
- Softer feel and better performance
