MTM 50 Round Flip-Top Rifle Ammo Box .22-250 to 7.62 X 39

The Cartridge Case Gage was designed with safety in mind and was invented by our founder Sam (L.E.) Wilson in 1935 after a fellow shooter approached him for help in solving a case-separation issue. The gage allows you to see just how much you are sizing back your shoulder on your cases. This is best done by measuring a case in AS-FIRED condition. Take a measurement. Then place back in the gage to see just how much you are sizing the shoulder back. Finally, adjust sizing die accordingly. After sizing your cases, there is a good chance the brass will lengthen. The gage will also check min/max case length and will point out the need for case trimming. This is an essential tool for every reloaded.

L.E. Wilson Inc. a family owned and operated business since 1927. And the first to produce the Case Gage in 1935
The "Wilson Case Gage" A one piece gage that will check overall length and indicate min/max case length
Measures min/max Headspace. Does not measure body diameters
This gage is intended to be used with fired cases to determine a basis for full length sizing and case trimming
Made in the U.S.A
L.E. Wilson Inc. a family owned and operated business since 1927. And the first to produce the Case Gage in 1935
The "Wilson Case Gage" A one piece gage that will check overall length and indicate min/max case length
Measures min/max Headspace. Does not measure body diameters
This gage is intended to be used with fired cases to determine a basis for full length sizing and case trimming
Made in the U.S.A

Top WaffleMaker Reviews

L.E. Wilson CG-65GRN Grendel Case Gage, Polished Steel;