U.S. Solid normally closed (N/C) electric solenoid valve is constructed with a Nylon, engineering plastic body, one-eighth inch (1/8") female threaded (NPT) connections, and nitrile rubber (NBR) seals. Suitable for use with hot or cold water, gas, air, oils, very low viscosity fluids (< 20 cst), etc.
Customers chose this general purpose valve for: do-it-yourself projects, moderate temperature applications, water exchange for aquarium, air horn, or bleeding moisture from an air tank.
Brand: U.S. Solid
Model: USS2-00084
Size: 1/8"
Flow Aperture: 2.5 mm
Body Material: Nylon engineering plastic
Gasket / Diaphragm / Seal: NBR
Rated voltage: DC 12 V, ± 10%
Current: 0.4 A
Power rating: 4.8 W
Operation Type: Direct Lift Valve
Operation Mode: Normally Closed
Operational pressure range: 0 to 101 PSI / 0-0.7 Mpa (for Air, Water); 0 to 72 PSI / 0-0.5 Mpa (for Oil)
Flow capacity: 0.23 gallons per minute (GPM) of water at 60oF with a pressure drop of 1 PSI
Flow value: 0.23 Cv
Minimum operational temperature: 23 degrees Fahrenheit (-5 degrees Celsius)
Maximum operational temperature: 176 degrees Fahrenheit (80 degrees Celsius)
Suitable Media: Air, water, oil, natural gas, etc. Can not be used in strong acid, strong base, waste water, industrial gas and other media containing many impurities.
Valve is not intended to be energized continuously for more than 8 hours. This can lead to burnout of the coil, and malfunctioning of the valve.
Quality assurance: CE Certified
