The Megaware SkegGuard is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable. This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant. Secured with self-locking hardware, the Megaware SkegGuard can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs. If replacing an already broken skeg, the Megaware SkegGuard can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg. Fits Mercruiser Alpha I, 1985-1990.
- Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
- Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
- Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
- Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
- Designed for Specific Motors – SkegGuard 27021 FITS Mercury MerCruiser: Alpha 1 1985-1990. Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha
- Skeg Guard Protector - Add an extra layer of protection to your skeg against ramp dragging, damage from hidden debris, and everyday wear and tear on the water with the SkegGuard from Megaware - also great for replacing a broken skeg
- Easy to Install - The skeg protector features a 3mm lower wear tab and is easy to install in just 4 simple steps in under 10 minutes; using a rubber mallet, slide the SkegGuard onto the existing skeg and gently tap on it until fully seated; use the pre-drilled holes to drill skeg using a 1/4-inch drill bit
- Superior Engineering - Our skeg protector is made from heavy-duty 18 gauge marine grade 316 stainless steel with a mirror-polished finish and easily conforms to your skeg; it also features a drain hole on the bottom to prevent water from collecting and causing corrosion or freezing
- Installation - You can attach/install the SkegGuard with as little as 2 to 3 inches of the original skeg remaining; comes with a 3-year warranty
- Designed for Specific Motors – SkegGuard 27021 FITS Mercury MerCruiser: Alpha 1 1985-1990. Additional models are available for inboard and outboard motors such as Evinrude, Johnson, Force, Honda, Mercury, Mariner, Nissan, Tohatsu, OMC, Suzuki, Volvo, and Yamaha
