This is a Brewin brand dual gauge CO2 regulator used for draft beer setups. The high pressure gauge reads between 0-3000 psi and the lower pressure gauge reads between 0-60 psi. There is an easy to turn knob which does not require any screw driver to adjust the pressure like other CO2 regulators and will easily dispense your beer consistently around 10 psi with little fluctuation in pressure. There is a shutoff valve for additional flow control.
- Heavy duty construction with heavy duty dual gauges, large adjustment knob and a big body for less pressure fluctuation
- Shut-off valve has a built in check valve that prevents beer back-up into the regulator and an outlet barb sized for use with 5/16” ID gas line hose
- Regulator dispenses at 30lbs and has a pressure safety system with blow off at 55 to 60 PSI
- Permanent seal at the inlet nipple provides enhanced protection of leaks and eliminates the need for fiber washers on every refill
- Heavy duty construction with heavy duty dual gauges, large adjustment knob and a big body for less pressure fluctuation
- Shut-off valve has a built in check valve that prevents beer back-up into the regulator and an outlet barb sized for use with 5/16” ID gas line hose
- Regulator dispenses at 30lbs and has a pressure safety system with blow off at 55 to 60 PSI
- Permanent seal at the inlet nipple provides enhanced protection of leaks and eliminates the need for fiber washers on every refill
