This GT2871 Turbo is capable of generating 400-600 HP, depending on application and with the correct tuning. The GT2871 is generally used for the displacement engines of 1.8L and up. This is the Universal Application Turbo, Professional Installation is highly recommended; some modification may be required for individual vehicle.
Specifications
Compressor Size:
* Inlet(Air Intake): 3"(77.5mm)
* Outlet: 2"(51.2mm)
* Trim: 48
* Inducer Diameter: 49.20mm
* Exducer Diameter: 71mm,
* A/R: 0.6
Turbine Size:
* Exhaust (Turbo Manifold) Flange: T25 4-Bolt Flange
* Exhaust (Downpipe) Flange: 5-Bolt Flange
* Trim: 76
* Inducer Diameter: 53.8mm
* Exducer Diameter: 71mm
* A/R: 0.64
Cooling Type: Water + Oil
Oil Restrictor: Yes
Oil Thread Size: W12*1.25
Water Thread Size: W8*1.25
Dimensions(length width Height)：220*210*210mm
Horse Power: Boost Horse Power up to 400BHP
Bearing Type: Journal Bearing
Accessories: Gasket included as picture shown
Application
Universal for Turbo Manifold with T25 Flange(T28 Flange can be converted to T25 Flange, Adrapter is needed). Perfect for all 1.8L-3.0L engine
NOTE:
* Professional installation is highly recommended (No Instruction Included)
* for any needs please contact us
- 【Application】：Universal for Turbo Manifold with T25 Flange(T28 Flange can be converted to T25 Flange, Adrapter is needed). Perfect for all 1.5L-2.0L engine
- 【Specification Size】Exhaust (Turbo Manifold) Flange: T25 4-Bolt Flange / Exhaust (Downpipe) Flange: 5-Bolt Flange
- 【Horse Power】: Boost Horse Power up to 350BHP
- 【Cooling Type】: Water and Oil Cooled. Oil Restrictor: Yes . [Oil Drain Thread Size: M8*1.25& Water Thread Size: M14*1.5]
- 【Important Notice】:1. This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore please check the specifications and verify compatibility prior to placing your order. 2. Some modification may be required, professional installation is highly recommended (No Instruction Included)
- 【Application】：Universal for Turbo Manifold with T25 Flange(T28 Flange can be converted to T25 Flange, Adrapter is needed). Perfect for all 1.5L-2.0L engine
- 【Specification Size】Exhaust (Turbo Manifold) Flange: T25 4-Bolt Flange / Exhaust (Downpipe) Flange: 5-Bolt Flange
- 【Horse Power】: Boost Horse Power up to 350BHP
- 【Cooling Type】: Water and Oil Cooled. Oil Restrictor: Yes . [Oil Drain Thread Size: M8*1.25& Water Thread Size: M14*1.5]
- 【Important Notice】:1. This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore please check the specifications and verify compatibility prior to placing your order. 2. Some modification may be required, professional installation is highly recommended (No Instruction Included)
