1. Simple two wire installation;

2. Convert the voltage from 12v to 5v;

3. Hide the wire when install the dash cam, makes your car look more tidy;

4. One end is micro-USB, which plugs into the...

Buy Now From Amazon

1. Simple two wire installation;

2. Convert the voltage from 12v to 5v;

3. Hide the wire when install the dash cam, makes your car look more tidy;

4. One end is micro-USB, which plugs into the camera, the other end connects
with your 12/24v car electrical system, provide a seamless integration;

5. 24 Hour Surveillance and Protects Against Battery Dying;

6. Protect your vehicle's battery from being drained by the dash camera;

7. If wired correctly, it also can provide permanent power to the camera, it is very useful
if you want it to continue to record when the car is parked.

8. Anti-interference Magnet Ring to reduce the radiation and prevent EMI interference,
prevent impulse current interference when you plug or pull it out, protect you and your equipment better;

9. This hardwire kit is also applicable to any camera with the micro-USB port.

  • Input Range: DC 12~24V Output Voltage: DC 5.0V, Output current: 1.5A Working Temperature: -40~ 160 Degree F.
  • 【Compatible for 12 /24V Vehicles】This hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12/24V.
  • 【Power Supply】Directly to the ignition wire(ACC) for power only so it can turn on and off with the ignition and you don't have to worry about plugging in the charger, or turning the dashcam on, or any such stuff.
  • Important Notice: This hardwire kit don't have parking mode fuction. Packaging:1 x Car Hard Wire Kit with Micro USB
  • Input Range: DC 12~24V Output Voltage: DC 5.0V, Output current: 1.5A Working Temperature: -40~ 160 Degree F.
  • 【Compatible for 12 /24V Vehicles】This hardwire kit connects the camera directly to the car, truck, bus, suvs, or big rig for continuous power, accepts voltage from any type of vehicles runs on 12/24V.
  • 【Power Supply】Directly to the ignition wire(ACC) for power only so it can turn on and off with the ignition and you don't have to worry about plugging in the charger, or turning the dashcam on, or any such stuff.
  • Important Notice: This hardwire kit don't have parking mode fuction. Packaging:1 x Car Hard Wire Kit with Micro USB

Similar Products

KDLINKS X1 GPS Enabled Full HD 1920x1080 165 Degree Wide Angle Dashboard Camera Recorder Car Dash Cam with Gravity Sensor, WDR Superior Night ModelMini 0805P Dash Cam Camera with Capacitor, GPS, G-Sensor, FHD 1296P, Night Vision, Motion Detection, OverTemperature Protection Upgrade 0805 Mini0805P Micro USB PortMini 0801S Dash Cam with Parking Monitor, Motion Detection, GPS Logger, G-Sensor, Capacitor, 1080P FHD, 1.5Nilight 12V Car Add-A-Circuit Fuse Tap Adapter Mini Atm Apm Blade Fuse Holder-10 Pack, 2 Years WarrantySanDisk Ultra 32GB microSDHC UHS-I Card with Adapter, Grey/Red, Standard Packaging (SDSQUNC-032G-GN6MA)10 Pack - EPAuto 12V Car Add-a-circuit Fuse TAP Adapter Mini ATM APM Blade Fuse HolderArpenkin Dash cam HardWire Kit Mini USB 12V to 5V Magnet Ring Anti-Interferance Power Adapter Cord Cable - Compatible for Rexing V1,A118,A119,G1W, G1W-C, G1WH, GT680W, Mini 0801(Mini USB)Dash Cam Mirror Mount - Fits Falcon F170HD,Rexing V1, Z-Edge, Old Shark, YI, Amebay,KDLINKS X1,VANTRUE and Most Other Dash Cameras