Great pump with bolts lockwasher and instructions no sight glass or drain pump but it is available on my other page for slightly higher price or call 727-858-1721 for application or instructions.
- The ROP Shop replacement Pressure Washer Pump with Keyway
- Specs - Pump - Maximum Pressure: 2600 PSI. Maximum Flow: 2.4 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Hollow Short Shaft. Bolt Pattern: 2 5/8" Center to Center & 1 7/8" Center to Each Outer Hole. Maximum Horsepower: 6.5 GHP. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Oil Capacity: 75 mls (2.5 oz). Keyway - Overall Dimensions: 3/16" x 1/4" x 1 1/8". Refer to images 2 & 3 for more information
- Includes - (1) Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve, Outlet Tube, & Oil Cap, and (1) Keyway; comes as shown in the first image
- This pump mounts horizontal (oil cap points up). Pump needs at least 5HP to handle PSI. Pump head cannot be flipped. Thermal relief valve comes pre-installed
- Uses 75 mls (2.5 oz) of 85W-90 gear oil (NOT included). Has a sight glass to view oil level and a drain plug for a simplified oil changing process. Please note it is not recommended to run any pressure washer pump above its maximum PSI rating. Doing so can result in damage to the pump (not covered by warranty) and/or serious bodily injury
- The ROP Shop replacement Pressure Washer Pump with Keyway
- Specs - Pump - Maximum Pressure: 2600 PSI. Maximum Flow: 2.4 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8" Hollow Short Shaft. Bolt Pattern: 2 5/8" Center to Center & 1 7/8" Center to Each Outer Hole. Maximum Horsepower: 6.5 GHP. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Oil Capacity: 75 mls (2.5 oz). Keyway - Overall Dimensions: 3/16" x 1/4" x 1 1/8". Refer to images 2 & 3 for more information
- Includes - (1) Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve, Outlet Tube, & Oil Cap, and (1) Keyway; comes as shown in the first image
- This pump mounts horizontal (oil cap points up). Pump needs at least 5HP to handle PSI. Pump head cannot be flipped. Thermal relief valve comes pre-installed
- Uses 75 mls (2.5 oz) of 85W-90 gear oil (NOT included). Has a sight glass to view oil level and a drain plug for a simplified oil changing process. Please note it is not recommended to run any pressure washer pump above its maximum PSI rating. Doing so can result in damage to the pump (not covered by warranty) and/or serious bodily injury
