- Connection (NW): 4 Inch
- Depth: 2 Inch
- temperature range: -10 bis +60 °C
- Material: Galvanized steel
- Surface: Steel
- color: Steel
- Manufacturer: Klimapartner
- ⚙️ PRODUCT FEATURES The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting since it is completely inside the duct. Backdraft damper for insertion into 5 inch ventilation ducts.
- ⚙️ PREMIUM MATERIAL The housing of the flap is made of galvanized steel. The flap blades are made of aluminum, while the axle and spring are made of stainless steel. Tight sealing and fastening of the duct are achieved by the rubber strip attached to the outside of the draft blocker damper. The rubber seal prevents loud rattling when the flap blades open and close.
- ⚙️ MULTI-USE Designed for use in AC, dryers, exhaust, extractor or range hoods, heating systems, vents, and other residential, commercial, and industrial HVAC applications. Please note that this is to be installed in metal ducts only. Measure the diameter of your duct before purchasing.
- ⚙️ PERFORMANCE Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves only open into the outgoing air direction. This means that no (cold) air/wind can penetrate the ventilation pipe from the outside.
- ⚙️ EASY INSTALLATION The backflow Preventer valve is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation.
- ⚙️ PRODUCT FEATURES The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting since it is completely inside the duct. Backdraft damper for insertion into 5 inch ventilation ducts.
- ⚙️ PREMIUM MATERIAL The housing of the flap is made of galvanized steel. The flap blades are made of aluminum, while the axle and spring are made of stainless steel. Tight sealing and fastening of the duct are achieved by the rubber strip attached to the outside of the draft blocker damper. The rubber seal prevents loud rattling when the flap blades open and close.
- ⚙️ MULTI-USE Designed for use in AC, dryers, exhaust, extractor or range hoods, heating systems, vents, and other residential, commercial, and industrial HVAC applications. Please note that this is to be installed in metal ducts only. Measure the diameter of your duct before purchasing.
- ⚙️ PERFORMANCE Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves only open into the outgoing air direction. This means that no (cold) air/wind can penetrate the ventilation pipe from the outside.
- ⚙️ EASY INSTALLATION The backflow Preventer valve is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation.
