VAP11G-500 is an environmentally and safe WiFi signal repeater. Working in the repeater mode, VAP11G-500 can be doubled to extend the original WiFi signal coverage, while ensuring the security of the wireless signal, and its working principle is: placing VAP11G-500 at the edges of the original WiFi hot spot signal coverage, VAP11G-500 can receive weak WiFi signal, and then zoom in to the normal, safe strength, and after optimization, error correction processing, to achieve signal coverage distance doubled extension under safe. VAP11G-500 has a normal power and high-power modes. In the high-power mode, accessible transmission distance up to 500 meters, expanding the coverage of the WiFi signal.
WiFi intelligent bridge function, Wireless switch wired, wired switch wireless, intelligent switch;
WiFi intelligent repeater mode, it supports WiFi hot spot scan automatically and WiFi hotspot memory function;
Hardware Specifications:
Interface:1 DC2.0 power hole; 1 dedicated two in one power supply cable, with a set of power supply and a set of 10/100m adaptive Ethernet cable.
Button: Reset button (long press 5 seconds)
Antenna: Built-in Intelligent omnidirectional antenna;
Tips:
1. The VAP11G-500 support DC5V-15V input voltage, it has a high require of the power adapter, the total input power is ≥10W,you can use USB 5V 2A adapter for it, if the input power is not    good or stable , it may can't work;
2. You can change the normal power(factory default) to High-power at the system settings;
3. In high- power mode, please use for paired, or use with other high-power wifi device, then it can reach to 500 meters.
- Industrial High Power Mini 2.4GHz WiFi Bridge Wireless Repeater Portable WiFi Hotspot with ethernet port (small size); Can achieve WiFi to Wired or Wired to WiFi function（Ethernet to WiFi,WiFi to Ethernet Adapter) ; Support WiFi 802.11b/g/n, WiFi rate:300Mbps; One 10/100Mbps adaptive RJ45 Ethernet cable (30cm).
- Support wide voltage DC5V-15V(Typical 5V/2A, ripple less than 100mV); USB/DC optional Powered Mode( two types of power supply can’t be used at the same time), one 30cm power cable with 1 male DC port and 1 male USB port, one female DC port of parallel connection.
- Point-to-point transmission distance: maximum can be up to 150-200 meters when without obstacle and small data, less than 50-100 meters when used for video transmission; Good partner for the elevator, penthouse flat, monitoring, electronic scales, DVR, IP camera, medical devices, IoT devices, video transmission, POS Cash Register, industrial PLC, PS3, network Printer, robot, AGV and more network application. 2 X 1.5dBi internal antennas.
- Support two kinds of application methods: WiFi smart repeater mode(WiFi signal repeater) , extend WiFi transmission distance ; WiFi Bridge Mode ( IP layer or MAC layer transparent transmission): WiFi AP hotspots；AP Client (WiFi client) mode, suit for IP camera.
- Support Multi-SSID bridging allowing Multiple VLANs to be supported. Support motion detection function and memory hotspot(Up to 100) automatic matching connection function, Adopt the original creation D/A temperature compensated auto frequency control technology (TAFC), make sure the lasting stability to ensure that the WiFi signal is not dropped.(Wifi 6 protocol is not supported).
- Industrial High Power Mini 2.4GHz WiFi Bridge Wireless Repeater Portable WiFi Hotspot with ethernet port (small size); Can achieve WiFi to Wired or Wired to WiFi function（Ethernet to WiFi,WiFi to Ethernet Adapter) ; Support WiFi 802.11b/g/n, WiFi rate:300Mbps; One 10/100Mbps adaptive RJ45 Ethernet cable (30cm).
- Support wide voltage DC5V-15V(Typical 5V/2A, ripple less than 100mV); USB/DC optional Powered Mode( two types of power supply can’t be used at the same time), one 30cm power cable with 1 male DC port and 1 male USB port, one female DC port of parallel connection.
- Point-to-point transmission distance: maximum can be up to 150-200 meters when without obstacle and small data, less than 50-100 meters when used for video transmission; Good partner for the elevator, penthouse flat, monitoring, electronic scales, DVR, IP camera, medical devices, IoT devices, video transmission, POS Cash Register, industrial PLC, PS3, network Printer, robot, AGV and more network application. 2 X 1.5dBi internal antennas.
- Support two kinds of application methods: WiFi smart repeater mode(WiFi signal repeater) , extend WiFi transmission distance ; WiFi Bridge Mode ( IP layer or MAC layer transparent transmission): WiFi AP hotspots；AP Client (WiFi client) mode, suit for IP camera.
- Support Multi-SSID bridging allowing Multiple VLANs to be supported. Support motion detection function and memory hotspot(Up to 100) automatic matching connection function, Adopt the original creation D/A temperature compensated auto frequency control technology (TAFC), make sure the lasting stability to ensure that the WiFi signal is not dropped.(Wifi 6 protocol is not supported).
