*Output Power: 40W (peak 70W).
*Working temperature: -40℃ ~ + 85℃(if temperature too high , please enhance heat dissipation).
*Operating frequency: 75KHz.
*Conversion efficiency: up to 88% (affe...

Buy Now From Amazon

*Output Power: 40W (peak 70W).
*Working temperature: -40℃ ~ + 85℃(if temperature too high , please enhance heat dissipation).
*Operating frequency: 75KHz.
*Conversion efficiency: up to 88% (affected by input voltage, output volage, current and dropout voltage).
*Short circuit protection: Yes. (Input 10A fuse, at the output please do not short circuit arc, it may damage the electronic component, if you need please add power resistor in series for limiting).
*Overcurrent protection: Yes. (Input current exceeds 4.5A, reducing the output voltage).
*Overvoltage protection: Yes (Output voltage exceeds 410V, lowering the output voltage).
*Input reverse polarity protection: Yes (non-self-healing, reverse burning fuse, you have better not reverse it).
*Installation: four 3mm screws.
*Connection: solderless terminals output.
*Module dimensions: 60mm(L) * 50mm(W) * 22(H)mm.
*The capacitor charging time measured data: -470uF full charge to 390V time is 2 seconds.
-1000uF full charge to 390V time is 4 seconds.
-2200uF full charge to 390V time is 8 seconds.
-4700uF full charge to 390V time is 18 seconds.
Applications: *The capacitor charging, guns power.
*The power supply for your electronic device, can set the output voltage value according to your system.
*Voltage pressure test power, glow tube power.
*Hunting, rodent.

Feedback:
We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help. Our aim is to provide Top Level Customer Service, so we will try our best to solve any problem.Thank you very much!

  • Input voltage: two input voltage range selectable, (jumper selectable through the back of the PCB, default setting 10-32V input): 1) 8V-16V input 2) 10V-32V input
  • Input Current: 5A (MAX)
  • Quiescent current: 15mA (12V step up to 50V, the higher the output voltage will increase the quiescent current)
  • Output voltage: ± 45-390V continuously adjustable (the default output ± 50V. This module has regulator function, after adjusted output voltage is stable and unchanging, not with changes in input voltage changes)
  • Output Current: 0.2A MAX (affected by input voltage and dropout voltage,the higher the output voltage, the smaller the output current)
  • Input voltage: two input voltage range selectable, (jumper selectable through the back of the PCB, default setting 10-32V input): 1) 8V-16V input 2) 10V-32V input
  • Input Current: 5A (MAX)
  • Quiescent current: 15mA (12V step up to 50V, the higher the output voltage will increase the quiescent current)
  • Output voltage: ± 45-390V continuously adjustable (the default output ± 50V. This module has regulator function, after adjusted output voltage is stable and unchanging, not with changes in input voltage changes)
  • Output Current: 0.2A MAX (affected by input voltage and dropout voltage,the higher the output voltage, the smaller the output current)

Similar Products

Qianson High Voltage DC-DC Boost Converter 8V-32V to ±45V-390V Adjustable ZVS Capacitor Charging Power Supply ModuleDROK 090749 Digital Voltmeter Gauge DC 0-600V Voltage Meter Gauges Power Supply AC/DC 9 to 12V Blue LCD Digital Display Voltage Tester MonitoringAven 17010 Adjustable Circuit Board Holder100uF 400V 18X30 +/-20% +105℃ 6 PCS Aluminum Electrolytic CapacitorseBoot 5 Pack Boost Converter Module XL6009 DC to DC 3.0-30 V to 5-35 V Output Voltage Adjustable Step-up Circuit Board30 Pcs Double Sided PCB Board Prototype Kit for DIY, 4 Sizes by PaxcooHCGF5A 2200 MFD 400 VDC HITACHI CAPACITOR【Genuine】NCH6100HV High Voltage DC Power Supply for Nixie/VFD Tube