PoE Texas | 8 Port Gigabit Ethernet Switch with Passive PoE on 7 Ports - Power Over Ethernet for 802.3af or 24v Devices;

Specifications
• 8 switch ports with 10/100/1000 auto detect operation, with status LED
• Available power supply options (not included)
• 18 volts, 24 volts, 48 volts 56 volts
• 30 watts, 60 watts, 120 watts
• 100 to 240 volt AC input, 50 or 60 hz high efficiency
• 7 always on PoE outputs with either Mode A or Mode B via switch per port
• Mode A power and data on pins 12 (-) and 36 (+)
• Mode B power or pins 45 (+) and 78 (-) with data on pins 12 and 36
• PTC fuse on each PoE output port - 650 ma fuse per port - self resetting
• 18 volt to 56 volt operation - low power- under 5 watts
• 2 power supply inputs
• 2.1mm power connector, center positive
• LED indicates 18/24 volt operation or 48/56 volt operation
• Maximum input current per mode - 2.5 amps
• Mode B PoE power input from the uplink port - 1.25 amps max - pins 45 / 78 can power the switch and also the PoE output ports
• Uplink port 10/100/1000 mb
• No PoE voltage out, Mode B PoE in
• 802.3af emulation (always on, no autonegotiation)
• 48 volt in either A or B modes
• Mikrotik, OpenMesh, Ubiquiti passive PoE
• 24 volt - use mode B only
• Low Power - excellent for Battery and Solar applications
• PoE repeating is possible - power this switch and attached devices remotely from any 24v, 48v or 56v power supply
• 195mm x 82mm x 26mm W x H x D