The best quality bilge pump available in the industry. It was developed after years of experience, research and testing. It is built to give you years of reliable trouble free performance. Most pumps fail due to installation errors, make sure you carefully read the instructions before you install it.
Includes comprehensive user manual with installation instructions and wiring diagram
Used in boat hulls, bilges, bait tanks, ponds, pools, spas
Specification:
- Flow Rate: 1100 GPH; Voltage: 12 VDC
- Outlet: 1-1/8"; Amp Draw: 3 Amp
- Head: 13 Ft (4mts); Liquid Temperature: 110°F (43°C) Max.
- Fully Submersible; Size: 4.5x 3.5 inch approx.; Weight: 12.15oz
- Package includes: 1x Bilge pump; 1x installations guide
Easy clean snap lock strainer
Silent operation
Compact, efficient long life motor
Rust and Corrosion protection
Anti-Airlock protection
Exclusive moisture tight seals
Marine grade blocked wiring
Ignition protection
Will not burn out when run dry
Stainless steel shafts
Rust and corrosion protection
CE certifications
Note: These pumps are designed for intermittent use only, NOT designed for continuous use
Bilge pumps are designed to exhaust standing water only. They are not intended to prevent rapid accumulation of on-board water due to rough weather, hull damage, and/or other unsafe navigational conditions. Note: Bilge pumps must be lower than the source of water for priming. Measure the diameter of the hose outlet on your electric bilge pump to determine the size pump you need before placing an order.
