BTS7960 43A High Power Vehicle Driver Module Current Limit
1. Double BTS7960 high current (43A) driven by H bridge;
2. With SCM 5V isolation, the effective protection of single chip microcomputer;
3. To realize the motor is to reverse, two PWM input with the highest frequency of 25kHZ;
4. Two overcurrent fault signal output would;
5. Isolation chip 5V power supply (with the singlechip common 5V);
6. The power supply voltage from 5.5V to 27V;
- 5V isolate with MCU, and effectively protect MCU; 5V power indicator on board.
- Voltage indication of motor driver output end; can solder heat sink.
- Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2); isolation chip 5 V power supply (can share with MCU 5 V).
- Able to reverse the motor forward, two PWM input frequency up to 25kHZ; two heat flow passing through an error signal output.
- Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply; the supply voltage 5.5V to 27V.
- 5V isolate with MCU, and effectively protect MCU; 5V power indicator on board.
- Voltage indication of motor driver output end; can solder heat sink.
- Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2); isolation chip 5 V power supply (can share with MCU 5 V).
- Able to reverse the motor forward, two PWM input frequency up to 25kHZ; two heat flow passing through an error signal output.
- Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply; the supply voltage 5.5V to 27V.
