â— Transducer Type: Condenser
â— Frequency response: 20Hz-18KHz
â— Pattern: Super-cardioid
◠output impedance (ohms): 200Ω
◠Sensitivity: -38± 2dB
â— Supply voltage (V): DC/ AA Type 7 1.5V / 48V phantom
â— Effective pickup distance: 50cm
â— audio cable lengths, configurations: 7.5meter long cable, XLR female + 6.35mm
â— Switch: Electronic Touch
PLEASE NOTES
another weymic gooseneck condenser microphone ,Metal Base,Anti cell phone, electromagnetic, high-frequency interference,without Tang Ring Ding Bell Ring
http://www.amazon.com/dp/B01DTTMDQW
PLEASE NOTES: if your microphone didn't work well,Please CONTACT US first. Let us help to solve problem.This product requires proper cables, power supply, amplifier or mixer, and speakers and other devices to work properly, the working environment is complex, PLEASE CONTACT US after has an problem.
THREE POWER SUPPLY:
1)AA type 7 battery(battery itself not included) AS power supply
you should prepare this battery,you can use XLR--6.3MM cable (not included but have the adaptor to covert),or use XLR female-XLR male cable (included) connect to Mixer or other device provided XLR or 6.3mm interface and then 48V phantom power not required.
2)DC Power Adapter (included) AS power supply.
Power adapter needs to be connected to an AC outlet(support 100-240V).you can use XLR--6.3MM cable (not included),or use XLR female-XLR male cable (included) connect to Mixer or other device provided XLR or 6.3mm interface and then 48V phantom power not required.
3)48V phantom power AS power supply
you must use XLR female -- XLR-male cable(included) AND connect to Mixer or other device that must provide the 48V phantom power.(be sure that device provide 48V phantom power and the phantom indicator is lighting that it's show the phantom power work well).