Features:
Frequency: 125Khz
Card Type: EM-ID Card (Can't support some encrypted cards, such as HID, Indala,Cobra, APCiK ,Paradox,Radio,Honeywell,etc)
Response Speed: Less than 0.2 second
Proximity Time Distance: Less than 0.5 seconds
Reading range: 3-15cm / 1.18-5.91in
Dimension: 86x86x18mm / 3.39x3.39x0.71in
Intput Voltage: DC9-16V; Max.70mA
Communication distance: Less than 100m/328ft
Can't work alone, need work with access control panel. (Please search ASIN: B00UX02JWE to get the access control panel)
Package:
1 x Wiegand 26 bit Card Reader (As it is reader,manual not included)
UHPPOTE - is a registered trademark protected by the US Trademark Law.UHPPOTE products are sold by UHPPOTE Amazon Store only.
- The RFID card reader can't work-alone and it needs to work with Wiegand protocol access controller, such as access control panel, fingerprint device or master controller.
- Support wiegand 26bits or wiegand 34bits output format.
- Ultra-low power consumption, the standby current is less than 50mA.
- It uses high performance MCU to ensure stable performance, and low-power circuit makes the service life longer.
- Widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.
- The RFID card reader can't work-alone and it needs to work with Wiegand protocol access controller, such as access control panel, fingerprint device or master controller.
- Support wiegand 26bits or wiegand 34bits output format.
- Ultra-low power consumption, the standby current is less than 50mA.
- It uses high performance MCU to ensure stable performance, and low-power circuit makes the service life longer.
- Widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.
