Silver Tip Epoxy is a medium-low viscosity, liquid epoxy resin system that has been optimized for coating and reinforcing fabric saturation in wood-composite boatbuilding. It will outperform any other product in these applications. Silver Tip Epoxy is designed for use with fiberglass, Kevlar, Dynel and graphite as well as on bare wood. It has superior wet-out characteristics with little tendency to foam or trap air. Both the resin and hardener are nearly colorless and are used in an easy 2:1 volumetric ratio. Silver Tip Epoxy cures to a brilliant blush-free film with either the fast or slow hardener eliminating secondary bonding concerns as experienced with other epoxies. The working time is longer than most boat building epoxies without extending cure time. The cured film is tough and resilient with better heat resistance than other epoxies cured at room temperature. Fillers, wood flour, and bulking agents can be combined with Silver Tip Epoxy, however, we suggest using the other members of the Silver Tip Series for adhesive, filleting and fairing applications.
- Premium Epoxy: SilverTip Epoxy is a crystal clear, blush-free epoxy system with an easy 2:1 mix ratio
- Easy To Apply: This resin epoxy has a high modulus and therefore develops rigidity without brittleness; great choice for brightwork applications due to its brilliant clarity and rapid film build characteristics
- Versatile Application: Due to its low viscosity, our resin kit wets out a variety of reinforcement materials with ease, including fiberglass, Kevlar, Dynel, and carbon fiber
- Tips and Tricks: This resin and hardener kit allows you to recoat without sanding within 72 hours and is compatible with most 1- and 2-part marine primers, paints, and varnishes
- Safe To Use: Our clear epoxy doesn't contain any volatile organic compounds and cures without forming an amine blush when paired with either the fast or slow hardener
- Premium Epoxy: SilverTip Epoxy is a crystal clear, blush-free epoxy system with an easy 2:1 mix ratio
- Easy To Apply: This resin epoxy has a high modulus and therefore develops rigidity without brittleness; great choice for brightwork applications due to its brilliant clarity and rapid film build characteristics
- Versatile Application: Due to its low viscosity, our resin kit wets out a variety of reinforcement materials with ease, including fiberglass, Kevlar, Dynel, and carbon fiber
- Tips and Tricks: This resin and hardener kit allows you to recoat without sanding within 72 hours and is compatible with most 1- and 2-part marine primers, paints, and varnishes
- Safe To Use: Our clear epoxy doesn't contain any volatile organic compounds and cures without forming an amine blush when paired with either the fast or slow hardener
