NOICO Liner 157 Mil 37.5 Sqft Car Heat Insulation Pad, Foam Self-Adhesive Sound Deadening and Automotive Dampening Mat for Cars (1/6'' Sound Deadener);

Noico Liner helps to keep the cold air of your A/C for longer ! The material has an optimum thickness and special structure thus offering a light weight. It effectively operates on the floor, doors and large surfaces, such as roof and the hood! This material is considered to be one of the best thermal insulators).

The operating temperature of the material is the same as of the rubber foam such as DynaLiner - up to 212 degrees Fahrenheit. DO NOT use this product as heat shield for mufflers, catalytic converters, DPF and more. In this case, you need to use special materials designed for 900-3000 degrees F.

Noico Liner makes your car quite! Material copes with noise suppression. But at the same time, the material is not a complete substitute for butyl based sound deadening. The most effective way to treat your car is: 1) place the butyl based material as a first layer (about 60 % of the total elimination of sound and vibration), 2) install the waterproof foam heat insulation Noico Liner as a second layer (40 % of the total elimination of noise insulation).

Noico Liner has the optimum level of adhesion! The material sticks well to the surface thus allowing for the correct operation. Easy to cut, handle and install. The material is intended for use in Automotive Firewalls, Car Doors, Headliners, Speaker Boxes, as well as the hood insulation.

Attention !!! An adhesive layer of product might not be compatible with some types of PVC plastic. It is not recommended to adhere that over the PVC plastic. That includes certain types of MLV ( mass loaded vinyl ) that might be the part of this materials. When using that in combination with MLV, the right sequence of installation is gluing the MLV to the surface of Noico Liner with some kind of glue or the installation with aid of Velcro. The wrong sequence of installation would be gluing of Noico Liner to the surface of MLV.