The NT301 engine diagnostic scan tool is the easiest and quickest solution for OBD faults. When auto scanner comes to diagnosing Check Engine issues you'd never go wrong with the new car diagnostic scan tool. It offers such useful information for entry-level pro and savvy DIYer that they can quickly and efficiently troubleshoot OBD2/EOBD problems on OBD II vehicles. Even though the diagnostic scanner compatibles with most cars from 2000, but different regions support the vehicle OBDII/EOBD protocol at different times, or some car is in special design, so it may not compatible with some cars which do not support OBD-II protocol. In general, it supports for the 12V voltage, 16 pin interfaces compliant US, European Asian OBDII/EOBD compliant vehicles. The scanner cannot work on all electric car. If you have any question, please email us, we are here and ready to help you at any time. We will provide you with the best of the best obd2 scanners. FEATURES: 1. Compatible with OBDII/EOBD compliant cars after 1996, light-duty trucks, SUVs sold worldwide. 2. Supports multiple code requests: Generic, manufacturer specific, pending and permanent codes. 3. Clears codes, turns off check engine light (MIL) and resets monitors. 4. Reads freeze frame data which shows engine conditions such as fuel trim, engine coolant temp, at the time the Malfunction Indicator Lamp (MIL) was set. 5. Reads, records, graphs & playbacks live sensor data. Reads live O2sensor/on-board monitor test data. 6. Retrieves vehicle information (VIN, CID and CVN). Enhanced Mode 6 data. 7. Automatic VIN acquisition and decoding makes it much easier to read manufacture specific codes and enhanced 6 data. 8. Prints data through computer. Please note: 1. The NT301 diagnostic tool cannot be updated on Mac system. Windows system is OK 2. Keep your vehicle's ignition ON while you are going to test your car.
- [Vehicle CEL Doctor] The NT301 obd2 scanner enables you to read DTCs, access to e-missions readiness status, turn off CEL(check engine light) or MIL, reset monitor, read live data and retrieve VIN of your vehicle. The fault code only can be cleared after repair finished by NT301, as like all the obd2 scanner's working principle.
- [Accuracy & Streams] Live data graphing and logging. Accurately read error codes for most Worldwide cars, SUVs, light trucks and 12V diesels equipped with Obd2. Graphing live vehicle sensors data allows you to focus on any suspicious data and trend. It's a basic code reader and doesn't support to scan and read codes about any car systems like ABS, TPMS, SRS, SAS systems. It also doesn't have any special functions like EPB reset/battery registration/oil reset/programming.
- [Worthy to Own] Recommended by most professional mechanics on Youtube. Codes analysis and Printer compatible. Unique PATENTED design, 2.8" color screen, F-ree Lifetime Update and 1-year seller assurance with EXCLUSIVE tech and service team.
- [S-mog Check Helper] Read/Erase and I/M readiness hotkeys make it easy to use the car computer reader right out of the package. Red-Yellow-Green Leds and build-in speaker indicate the readiness status for confident e-missions test.
- [Home Necessity + Plug & Play] Open to global customers. No built-in battery required, so it's powered when connecting with car obd2 port or usb cable. No need to update before use. NT301 obd scanner is charged directly from the 16pin DLC in your vehicle. It is recommended as a necessity in your toolbox and great choice for Home and Autoshop Mechanics.
- [OBDII Protocols & Compatibility] The NT301 supports OBDII protocols like KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. The device is compatible with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs. Kindly check the vehicle compatibility before the purchase since the function comatibility and car compatibility vary from different car models, year and vin.
- [Read Fault Codes] About the read code funtion needs to be in the ignition on state and if the check engine light is on. If the vehicle is compatible with NT301, please select correct menu & ensure no hardware/wiring issues/obd2 interface damage for accurate results. The correct menu: Select OBDII-> Wait for seconds-> Select Read codes
- [Please Note] If you are not pleased with your NT301 and choose to return it, please kindly mark it as unsellable to avoid and used one is resold again to other customers. Appreciate very much. If you received the used product, wrong items, missed parts or package damage, we also are responsible for these problems and will provide new replacement or refund.
- [Vehicle CEL Doctor] The NT301 obd2 scanner enables you to read DTCs, access to e-missions readiness status, turn off CEL(check engine light) or MIL, reset monitor, read live data and retrieve VIN of your vehicle. The fault code only can be cleared after repair finished by NT301, as like all the obd2 scanner's working principle.
- [Accuracy & Streams] Live data graphing and logging. Accurately read error codes for most Worldwide cars, SUVs, light trucks and 12V diesels equipped with Obd2. Graphing live vehicle sensors data allows you to focus on any suspicious data and trend. It's a basic code reader and doesn't support to scan and read codes about any car systems like ABS, TPMS, SRS, SAS systems. It also doesn't have any special functions like EPB reset/battery registration/oil reset/programming.
- [Worthy to Own] Recommended by most professional mechanics on Youtube. Codes analysis and Printer compatible. Unique PATENTED design, 2.8" color screen, F-ree Lifetime Update and 1-year seller assurance with EXCLUSIVE tech and service team.
- [S-mog Check Helper] Read/Erase and I/M readiness hotkeys make it easy to use the car computer reader right out of the package. Red-Yellow-Green Leds and build-in speaker indicate the readiness status for confident e-missions test.
- [Home Necessity + Plug & Play] Open to global customers. No built-in battery required, so it's powered when connecting with car obd2 port or usb cable. No need to update before use. NT301 obd scanner is charged directly from the 16pin DLC in your vehicle. It is recommended as a necessity in your toolbox and great choice for Home and Autoshop Mechanics.
- [OBDII Protocols & Compatibility] The NT301 supports OBDII protocols like KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. The device is compatible with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs. Kindly check the vehicle compatibility before the purchase since the function comatibility and car compatibility vary from different car models, year and vin.
- [Read Fault Codes] About the read code funtion needs to be in the ignition on state and if the check engine light is on. If the vehicle is compatible with NT301, please select correct menu & ensure no hardware/wiring issues/obd2 interface damage for accurate results. The correct menu: Select OBDII-> Wait for seconds-> Select Read codes
- [Please Note] If you are not pleased with your NT301 and choose to return it, please kindly mark it as unsellable to avoid and used one is resold again to other customers. Appreciate very much. If you received the used product, wrong items, missed parts or package damage, we also are responsible for these problems and will provide new replacement or refund.
