Rubber Donut style coil spring booster. 3 Inch thick for approximately a 2-1/2 Inch lift. Spacer is 5-1/2 Inch diameter, fits in the groove but diameter can be cut to fit for custom applications. 1 unit per card, 2 units required for 2 coils.
- 5" Diameter in the groove, 3" Thick. Provides approx. 2.5" lift.
- Slit for cutting to fit and winding into the middle of the coil to help restore sagging springs.
- Do not attempt to place this item at the bottom of the coil. This could cause injury or death.
- A spring compressor is required for placing donut at the bottom of the spring. DO NOT DO THIS YOURSELF. THIS REQUIRES A LICENSED MECHANIC.
- 5" Diameter in the groove, 3" Thick. Provides approx. 2.5" lift.
- Slit for cutting to fit and winding into the middle of the coil to help restore sagging springs.
- Do not attempt to place this item at the bottom of the coil. This could cause injury or death.
- A spring compressor is required for placing donut at the bottom of the spring. DO NOT DO THIS YOURSELF. THIS REQUIRES A LICENSED MECHANIC.
