12V version with 40W heater. DIY hotend requires heat sink to operate properly - metal base, aluminum block, or any other type of cooling device.

Assembly of this device is straight forward. Please consult w...

Buy Now From Amazon

12V version with 40W heater. DIY hotend requires heat sink to operate properly - metal base, aluminum block, or any other type of cooling device.

Assembly of this device is straight forward. Please consult with supplied drawings and pictures for visual clue. Thermistor mounted with clamping screw and washer similar to E3D V6.

DIY Hotend features:

- 30mm long stainless PTFE lined barrel, for low friction, trouble free print.
- Nozzle is based on MK8 makerbot nozzle geometry and can be exchanged or replaced with many different types of nozzles on the market. This will give you good selection of nozzle orifice diameters.
- Low profile: only about 43 mm high.
- NTC 3950 100K pre-wired thermistor.

NTC 3950 Thermistor parameters:

- Small Size: 1.25mmx2.0mm glass bead
- High accuracy: 1%
- Resistance value at 25C=100K
- Wiring insulation: high temperature teflon/PTFE
- Wiring length: 1 meter

Package Contents:

1 x MK8 Nozzle 0.4mm extrusion diameter.
1 x Stainless PTFE lined barrel.
1 x Aluminum heater block with 1 x M3x3 setscrew, 1 x M3x4 Socket head screw, 1 x M3 Washer.
1 x 12V 40W Cartridge Heater.
1 x NTC 3950 Pre-wired thermistor



Similar Products

EAONE 6pcs 30MM Length Extruder 1.75MM Tube and 6pcs 0.4MM Brass Extruder Nozzle Print Heads for MK8 Makerbot Reprap 3D Printers (Bonus: 2pcs Cleaning Drill Bits)PChero 5pcs 30MM Length Extruder 1.75mm Tube and 5pcs 0.4mm Brass Extruder Nozzle Print Heads for Anet A8 and MK8 Makerbot Reprap 3D PrintersURBEST Inlet Module Plug 5A Fuse Switch Male Power Socket 10A 250V 3 Pin IEC320 C14BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D PrinterWAHHING 10PCS 2mm thick heating block cotton For 3D printer hotend nozzle heat insulation3D Printer Heat Bed Power Module SIMPZIA General Add-on Hot Bed Mosfet MOS Tube High Current Load Module for 3D Printer Hot Bed/Hot End(2 Pack)Kamo 5PCS 3D Printer 0.4mm Extruder Brass Nozzle Print Head for MK8 1.75mm ABS PLA PrinterBIQU Aluminum Heater Block Specialized for MK7 MK8 3D Printer Extruder(Pack of 5pcs)