NOTE: These are extended-length lug bolts and are meant to be used with wheel spacers.
NOTE: Double check the Thread Size,Shank Length, and Seat you need before purchasing. Installing incompatible hardware can cause damage to vehicle components and may cause lug bolts to loosen while driving.
Specifications:
Thread Size: 14x1.5
Color: Silver
Seat Type: Cone Seat (60 Degree Taper)
Shank Length: 40mm
Compatibility:
Only Audi, Mercedes, & Volkswagen that use 14x1.5 Lug Bolts.
Audi
1999+ TT
1998+ A3
2000+ S3
1996+ A4
1992+ S4
2008+ A5 / S5
1995+ A6 / S6
1997+ A8
2001+ S8
2016+ A7
2013+ S7
2009+ Q5
2007+ Q7
2012+ SQ5
Volkswagen
1985+ Beetle
2007-2016 EOS
1999+ Golf
2006+ GTI
2000+ Jetta
1998+ Passat
2009+ Tiguan
Determine what Shank Length is needed
1) Measure shank length of OEM bolt (Threaded portion, starting at end of the seat to the end of the bolt).
2) Measure the thickness of the spacer being used.
3) Add measurements from step 1 and step 2, and you have the shank length needed.
Difference between Cone and Ball seat
This is determined by your wheel's lug seat. The seat of the bolt refers to the part of the bolt that makes contact with the wheel's lug seat. The most common seats are Cone (conical) and Ball (radius). Cone type features a straight taper seat, whereas Ball type features a curved seat.
IMPORTANT: Check Before Purchasing
- Vehicle must use 14x1.5 threaded lug bolts.
- Shank Length: Verify this 40mm Shank Length Bolt is the correct size. Buyers must measure their OEM bolt and spacer to determine if this is correct.
- Seat Type: Check your wheel lug hole. These bolts will only work if your lug holes are Cone Seat (60 Degree Taper).
- IMPORTANT: NOT OEM LENGTH. This is an extended length lug bolt, NOT an OEM replacement lug bolt. NOT to be used without wheel spacers. The correct length will depend on your OEM bolt's length and the spacer's thickness. See Diagram for Measuring Help. MEASURE BEFORE PURCHASING. Installing bolts that are too short can cause them to fall out while driving. Installing bolts that are too long may damage brake components.
- WARNING: VERIFY VEHICLE LUG BOLT SIZE, SEAT AND THREADS. Check your vehicle's bolt thread size, as various years/models come with different size bolts. These are Cone Seat (60 Degree Taper) shaped bolts. Make sure your wheels bolt seat have this seat type. See Diagram for Help. During Installation, ensure that your bolts get 5-8 full turns before tightening.
- [SPECIFICATIONS] Pack of 20 - Silver Bolts | Thread Size: 14x1.5 | Seat Type: Cone Seat (60 Degree Taper) | Shank Length: 40mm (ie thread length).
- MANUFACTURING: Made with cold forged steel. Machine precision threads ensure the best fit on your vehicle's hub. Zinc coating provides exceptional corrosion/rust resistance and appearance. Additional Heat Treating Process ensures dependable strength, durability, and performance.
- FITMENT: Compatible with Audi A3, S3, A4, S4, A5, S5, A6, S6, Including FWD RWD Quattro. Compatible with Audi A7, S7, A8, S8, TT, Q5, Q7, Including FWD RWD Quattro. Also compatible with Volkswagen 1985+ Beetle, 2007-2016 EOS, 1993-1998 Golf V6, 1999+ Golf. Compatible with Volkswagen 2006+ GTI, 2000+ Jetta, 1998+ Passat, 2009+ Tiguan.
- IMPORTANT: NOT OEM LENGTH. This is an extended length lug bolt, NOT an OEM replacement lug bolt. NOT to be used without wheel spacers. The correct length will depend on your OEM bolt's length and the spacer's thickness. See Diagram for Measuring Help. MEASURE BEFORE PURCHASING. Installing bolts that are too short can cause them to fall out while driving. Installing bolts that are too long may damage brake components.
- WARNING: VERIFY VEHICLE LUG BOLT SIZE, SEAT AND THREADS. Check your vehicle's bolt thread size, as various years/models come with different size bolts. These are Cone Seat (60 Degree Taper) shaped bolts. Make sure your wheels bolt seat have this seat type. See Diagram for Help. During Installation, ensure that your bolts get 5-8 full turns before tightening.
- [SPECIFICATIONS] Pack of 20 - Silver Bolts | Thread Size: 14x1.5 | Seat Type: Cone Seat (60 Degree Taper) | Shank Length: 40mm (ie thread length).
- MANUFACTURING: Made with cold forged steel. Machine precision threads ensure the best fit on your vehicle's hub. Zinc coating provides exceptional corrosion/rust resistance and appearance. Additional Heat Treating Process ensures dependable strength, durability, and performance.
- FITMENT: Compatible with Audi A3, S3, A4, S4, A5, S5, A6, S6, Including FWD RWD Quattro. Compatible with Audi A7, S7, A8, S8, TT, Q5, Q7, Including FWD RWD Quattro. Also compatible with Volkswagen 1985+ Beetle, 2007-2016 EOS, 1993-1998 Golf V6, 1999+ Golf. Compatible with Volkswagen 2006+ GTI, 2000+ Jetta, 1998+ Passat, 2009+ Tiguan.
