Model: CP-3015
Material: Iron
Color: Copper
Durable for long-term use
It is affordable and convenient to operate
With anti-oxidation stability and anti-corrosion ability, it has a good performance in desoldering
- Braided solder cores are suitable for laboratory, home, and industrial welding work. They can be used to correct errors on small boards on PCBs, remove relays and other components from printed circuit boards, re solder mechanical keyboard switches, remove old wires from equipment, remove computer parts such as motherboards, and clean alloys on SMD components
- 1 unclean solder core, each about 5 feet long and 0.12 inches wide, sufficient in quantity and length to meet your daily needs
- This type of detachable solder core has geometrically precise copper wire weaving, good quality, and starts working from the tip of the detachable solder core. Once the detachable solder core and solder are heated, the solder weaving fabric can quickly absorb melted solder and leave a clean working area.
- If it is the first time using a solder core, it is recommended to use multi-point flux to assist in cleaning. At the same time, to prevent burns, do not directly contact the solder core at close range during use.
- Braided solder cores are suitable for laboratory, home, and industrial welding work. They can be used to correct errors on small boards on PCBs, remove relays and other components from printed circuit boards, re solder mechanical keyboard switches, remove old wires from equipment, remove computer parts such as motherboards, and clean alloys on SMD components
- 1 unclean solder core, each about 5 feet long and 0.12 inches wide, sufficient in quantity and length to meet your daily needs
- This type of detachable solder core has geometrically precise copper wire weaving, good quality, and starts working from the tip of the detachable solder core. Once the detachable solder core and solder are heated, the solder weaving fabric can quickly absorb melted solder and leave a clean working area.
- If it is the first time using a solder core, it is recommended to use multi-point flux to assist in cleaning. At the same time, to prevent burns, do not directly contact the solder core at close range during use.
