Note: The color of the item may vary slightly due to photography and your own computer
Hole Saw for Glass
It can cut tidy, smooth, no broken edges and no tremor phenomenon
Small incision resistance, improved the openning speed
Excellent for making clean and accurate holes on glass and tile
Designed with diamond coated tip and sturdy metal body, gives good performance and longer life
Specifications:
Product Name:Glass Hole Saw;
Material:Metal
Color : Silver
Cutting Hole Outer Diameter: 4mm/0.16"
Shank Hole Diameter:2mm/0.07"
Shank Dia (Approx.):2mm/0.07";
Total Length : 50mm/2"
Size:5x0.2x0.2cm/2x0.07x0.07Inch
Weight:25g
Package included:
10 x Glass Hole Saw
- The hole diameter of the drill bit is 4mm, which is about 1/4 inch.it's 2 inches long and it could be fit into a standard bit extension.It can cut tidy, smooth, no broken edges and no tremor phenomenon
- .If you're drilling into stone, make sure you use water and don't push too hard. to make a shallow surface etching such as hieroglyphs on a sandstone cave wall with a cordless drill or if using on soft rock they could be successfully used to engrave rock
- Note: Please pay attention to add water to cool when processing , overheating will increase the loss of powder
- able to get perhaps a total drilling of 5 or 10 holes in ceramic floor tile with a single bit if drill wet and don't hurry. Softer wall tile allows more holes
- Small incision resistance, improved the openning speed
- The hole diameter of the drill bit is 4mm, which is about 1/4 inch.it's 2 inches long and it could be fit into a standard bit extension.It can cut tidy, smooth, no broken edges and no tremor phenomenon
- .If you're drilling into stone, make sure you use water and don't push too hard. to make a shallow surface etching such as hieroglyphs on a sandstone cave wall with a cordless drill or if using on soft rock they could be successfully used to engrave rock
- Note: Please pay attention to add water to cool when processing , overheating will increase the loss of powder
- able to get perhaps a total drilling of 5 or 10 holes in ceramic floor tile with a single bit if drill wet and don't hurry. Softer wall tile allows more holes
- Small incision resistance, improved the openning speed
