This page feature a universal fit 2-Pin Electronic LED Flasher Relay for motorcycle/bike fixing the LED bulbs related turn signal light hyper flash, not function properly issues.
Please note that this LED flash will only fix the LED bulb's hyper flash issue, not the wattage lower than stock bulb related "bulb out" warning message on dashboard.
By using this universal fit 2-pin LED flasher, you can install the LED bulbs for the motorcycle/bike for turn signal lights without adding the load resistors.
Features
1 piece
Part# LF1-S-PIN
Size: 1" (L) x 1" (W) x 1" (D)
Completely waterproof design
Directly replace the OEM two-wire flasher
Eliminate the need for tapping wires to install the load resistors
Allow LED bulbs to blink at the normal rate
Work for most Motorcycles such as Honda, Kawasaki, Suzuki, Yamaha, and many other brands as well
Spec
Operating Voltage: 12V (11V-15V)
Max Power: 150W
Flashing Frequency: 90 Times/Min
Switch Power: 0.02A to 12A
Operating Temperature: -40°C to +80°C
Work to replace most 2-pin flasher (if the wirings orders are different, you can always remove the white adapter to plug in the wires/pins directly)
Known fitments
Honda CBR600 CB900 CBR1000 VTX1300 VT1300
Suzuki GSX R600 R750 R1100 GSF600S GSF1200S
Yamaha YZF FZ WR
Kawasaki Ninja ZZR ZX VULCAN, etc
- Compatible with Honda, Kawasaki, Suzuki, Yamaha motorcycles and many other brands motor bikes as well
- One 2-pin cubic LF1-S-PIN LED flasher (size: 1x1x1") ) with IP67 waterproof design and direct plug in adapter
- This LED flasher does not replace all flasher units; please count the pin numbers and the shape/configuration/size in the pictures and compare them with the one you are replacing BEFORE YOU ORDER!
- Eliminate splice/tap wire/add load resistor modification for normal turn signal flash speed/rate, suitable for front/rear LED signal bulbs or LED taillight/front light upgrade; this heat-free flasher, with just 1pc, solves the entire vehicle's LED upgrade
- Unplug your original flasher typically inside the under-dashboard or under hood engine bay fuse box, directly replace it with the LED fix flasher; always compare yours with our gallery pictures before buying to avoid purchasing the wrong one and wasting your time and money
- Compatible with Honda, Kawasaki, Suzuki, Yamaha motorcycles and many other brands motor bikes as well
- One 2-pin cubic LF1-S-PIN LED flasher (size: 1x1x1") ) with IP67 waterproof design and direct plug in adapter
- This LED flasher does not replace all flasher units; please count the pin numbers and the shape/configuration/size in the pictures and compare them with the one you are replacing BEFORE YOU ORDER!
- Eliminate splice/tap wire/add load resistor modification for normal turn signal flash speed/rate, suitable for front/rear LED signal bulbs or LED taillight/front light upgrade; this heat-free flasher, with just 1pc, solves the entire vehicle's LED upgrade
- Unplug your original flasher typically inside the under-dashboard or under hood engine bay fuse box, directly replace it with the LED fix flasher; always compare yours with our gallery pictures before buying to avoid purchasing the wrong one and wasting your time and money
