Interlocking Z Clips for Flush Mounting Pictures, Head Boards, & Wall Panels - 10 Sets;

The perfect solution for wall-mounting art work, head boards, wall paneling... ANYTHING!
These clips are amazing! They allow you to quickly, easily, and INVISIBLY mount just about anything to a vertical surface, while only using 1/4" in thickness! Desunia Flush-Mount Clips are superior to conventional Z-Clips in every way. Consider...
- They're made of STEEL, not aluminum. So they're incredibly strong.
- They INTERLOCK! This makes it impossible for your wall-hung items to ever accidently slide off to the side. A HUGE safety feature.
- Screw holes are countersunk and completely symmetrical (not staggered). This makes laying out for installation 10X easier.

Installation tips...
- Each set has about 1/16" of lateral play. This makes them fairly forgiving, but try to be as precise as possible when laying things out.
- Attach to wall first. The hole spacing is 1 9/16", so be sure to find the exact center of the stud and put the 1 3/4" screws in at a slight angle to ensure you get a good bite into the wood.
- Measure out and secure clips to the object you're hanging, just using 2 screws in each clip.
- Hang the object. If no tweaks are needed, install the remaining screws.
- The clips themselves have a finished thickness of 1/4". That's fine for most applications, but if you're handy in the workshop and are able to route a recess in the back of the wood item you want to hang, a completely flush look can be achieved.

Here's what you get...
- Ten sets of Interlocking flush-mount clips.
- Fourty #6 x 3/4" flat head screws.
- Fourty #6 x 1-3/4" flat head screws.