Antigravity Batteries AG-MSA-10 Harness Clampless Starting Kit with SAE Charger Adapter;

This clampless starting harness kit is for the XP-5, the Sport, or Older/Original XP-3 and XP-1 Micro-Start models ONLY! The Micro-Start Clampless Harness Kit was made so that a rider or driver can easily jump start their vehicle using just the Micro-Start without the need for the clamps, or having to remove the seat on your motorcycle. It is a 12" (300mm) harness that connects directly to the battery while the other end can plug directly into the Micro-Start's jump start port. It adds convenience and saves time if the situation arises when you have to jump start your vehicle...just connect the MICRO-START directly to this harness and jump-start your vehicle without having to use the Micro-Start jumper clamps! Also included in the kit is an adapter that converts the Micro-Start Harness (blue connector) down to an SAE Connector so you can easily hook up your battery charger and eliminate the standard SAE harness you might have. A standard Battery Tender type harness WILL NOT handle jump-starting... the wire gauge is much to thin and it will melt the wires. PLEASE NOTE: The Micro-Start is for jump-starting only through the jump start port. Never leave the Micro-Start connected to your vehicle's battery for longer than 30 seconds, or use in place of your regular battery in your vehicle. Do not try to charge the Micro-Start directly from your vehicle battery through the jump start port. Severe damage can result! Use only the provided chargers in the Micro-Start's kit to charge the Micro-Start! Kit Includes: 1 piece Micro-Start Clampless Harness (12" long, for use with the Micro-Start XP-5, Sport, or older/original XP-3 and XP-1 models), and 1 adapter that converts the Micro-Start Harness (blue connector) down to an SAE Connector. This will not work with the XP-10, which requires model AG-MSA-10B.