This bike motor kit comes with everything that you will need, except gas and oil! You will be able to stop or start the engine as you ride. 50CC 2-stroke engine kit will fit 26" or 28" Bicycle.
Specification:
air-cooling
Net Weight: 10.5kg
Driving Ratio 18:01
Ignition Mode CDI
Compression Ratio 6:01
Mode of Engine Single cylinder
2-stroke Bore & Stroke 40mm X 38mm=48 cm3
Max. Power 1.6Kw/6000r/min (3 horsepower/6000r/min)
Rated Power 1.15Kw/5000r/min (1.6 horsepower/5000r/min)
Type of Sparking Plug Z4C 14MM Volume of oil Consumption 1.5L/100km
Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km
Fuel type No.90 Lubrication Oil oil for 2-stroke petrol engine (or oil for 10W/40.10W/30)
Type of Clutch Friction Plate / Dry Cooling mode Natural air cooling Speed Limitation 30km/hour
Package Included:
1X Full 50cc 2-Stroke Engine Motor Kit (Bicycle Not Included)
Note: The engine will be installed by yourself, and you will receive what you see in the pictures.
- The 2-stroke petrol engine mixing Ratio of Fuel(90#) and Engine Oil: 16: 1 for New sets, 20: 1 after Running 500Km.
- This 50cc/80cc bicycle engine easy to install. The rider only needs some basic hardware skills, tools, and fine tuning adjustments (Note: Seller is not responsible for misuse or this kit or any warranty after installation).
- Fits Most 26"&28'' Wheeled Bikes (Mountain, Cruiser, Chopper, Road) with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
- To start the 2-stroke engine, move the choke lever to "on" position, hold in clutch, pedal the bike to get some speed, and then release the clutch gradually.
- To stop the 2-stroke engine, choke the carburetor completely with the lever on the carburetor. Alternatively, slow speed, hold in clutch and press the kill switch on twist-grip throttle.6. If you want to use your bicycle as a common bike, just disengage clutch, then press the silver button at the side of clutch, the motor will not be started.
- The 2-stroke petrol engine mixing Ratio of Fuel(90#) and Engine Oil: 16: 1 for New sets, 20: 1 after Running 500Km.
- This 50cc/80cc bicycle engine easy to install. The rider only needs some basic hardware skills, tools, and fine tuning adjustments (Note: Seller is not responsible for misuse or this kit or any warranty after installation).
- Fits Most 26"&28'' Wheeled Bikes (Mountain, Cruiser, Chopper, Road) with V-frame. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1").
- To start the 2-stroke engine, move the choke lever to "on" position, hold in clutch, pedal the bike to get some speed, and then release the clutch gradually.
- To stop the 2-stroke engine, choke the carburetor completely with the lever on the carburetor. Alternatively, slow speed, hold in clutch and press the kill switch on twist-grip throttle.6. If you want to use your bicycle as a common bike, just disengage clutch, then press the silver button at the side of clutch, the motor will not be started.
