As a professional electrician, you're likely to spend a lot of time twisting wires. This can be boring, repetitive, and time consuming. With these In-Sure 4 port connectors, you can be sure of a positive connection without the twisting action. For these connectors, you only need to make sure your wire is stripped to a half inch. After that, push it into the connecting socket, and you're good to go. The plastic coating on the outside lets you look into the unit to ensure a proper connection. From there, you can plug in the connector wherever it needs to go. Whether you're an electrician or working in IT, there are plenty of jobs around where these will serve you well.
- WIRE RANGE: Solid: 12 AWG - 20 AWG, Stranded: 12 AWG - 16 AWG (Less than or equal to 19 strands) 18 AWG (7 Strands), Stranded Tin Bonded 14 AWG - 18 AWG (Less than or equal to 19 strands)
- TEMPERATURE RATING: 105 Degrees Celsius (221 Degrees Fahrenheit). 600 Volts maximum for building wire, 1000 Volts maximum for lighting fixtures
- CLEAR SHELL: With this see-through protective coating, you'll be able to visually inspect proper connection in every plug
- NO TWIST NECESSARY: Just push the wire into one of the four compartments. This will spare you from unnecessary fatigue on the jobsite
- COPPER TO COPPER ONLY: Advised against using with aluminum coating or other materials
- WIRE RANGE: Solid: 12 AWG - 20 AWG, Stranded: 12 AWG - 16 AWG (Less than or equal to 19 strands) 18 AWG (7 Strands), Stranded Tin Bonded 14 AWG - 18 AWG (Less than or equal to 19 strands)
- TEMPERATURE RATING: 105 Degrees Celsius (221 Degrees Fahrenheit). 600 Volts maximum for building wire, 1000 Volts maximum for lighting fixtures
- CLEAR SHELL: With this see-through protective coating, you'll be able to visually inspect proper connection in every plug
- NO TWIST NECESSARY: Just push the wire into one of the four compartments. This will spare you from unnecessary fatigue on the jobsite
- COPPER TO COPPER ONLY: Advised against using with aluminum coating or other materials
