Best for achieving a smooth finish on laminate or veneer finish applications.• Cutting Diameter: 1/4" • Cutting Height: 1" • Shank Diameter: 1/4" • Overall Length: 2-1/2" • Flutes: 2 Compression...

Buy Now From Amazon

Best for achieving a smooth finish on laminate or veneer finish applications.• Cutting Diameter: 1/4" • Cutting Height: 1" • Shank Diameter: 1/4" • Overall Length: 2-1/2" • Flutes: 2 Compression bits cut down from the top of the stock and up from the bottom of the stock simultaneously. The bit's unique and complex geometry forces the trimmed material to be compressed toward the center of the stock leaving behind a smooth & sharp finish free of chips on both the top and bottom edges. This bit can also be used for mortising projects that require a smooth bottom surface without sacrificing the mortised edge finish.

  • For a clean CNC milled finish on both top and bottom surfaces of laminated materials and plywood
  • Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool
  • "For use on CNC, table mount and handheld routers"
  • Polished to a mirror finish from a solid carbide rod for precision & accuracy
  • For a clean CNC milled finish on both top and bottom surfaces of laminated materials and plywood
  • Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool
  • "For use on CNC, table mount and handheld routers"
  • Polished to a mirror finish from a solid carbide rod for precision & accuracy

Similar Products

JERRAY UP/DOWN Tools Made HRC55 Solid Carbide, 2 Flutes Compression Wood End Mill router bits,1/4Yonico 31215-SC Yonico 31215-SC CNC Router Bit Up Cut Solid Carbide 1/4Whiteside Router Bits UD2102 Up/Down Cut Spiral Bit with Solid Carbide Compression and 1/4-Inch Cutting DiameterYonico 34221-SC CNC Router Bit Ball Nose Solid Carbide with 1/4-Inch X 1-Inch X 1/4-Inch X 2-1/2-Inch 1/4-Inch ShankHOZLY UP & DOWN Cut 3.175x17mm Two Flutes Spiral Carbide Tool For CNC Router Compression Wood End Mill Cutter Bits Pack of 5Yonico 33310-SC 1/4-Inch Dia. 3 Flute Compression Cut Spiral End Mill CNC Router Bit 1/4-Inch ShankHQMaster CNC Router Bits 1/8 Router Bit 1 8 End Mill Flat Nose Carbide Endmill 2-Flute Spiral Upcut Milling Cutter Tool Set 17mm CEL, 38.5mm OAL for Wood Nylon Resin ABS Acrylic PVC MDF Hardwood 10PcsYonico 31011-SC O-Flute Up Cut Solid Carbide CNC Router Bit, 1/8 x 1/2 x 1/4 x 2