FastFlash is part of the family of PROSOCO R-GUARD products developed to prevent the unwanted movement of water and air through building envelopes. Use FastFlash to adhere, transition and counter-flash through-wall sheet fla...

Buy Now From Amazon

FastFlash is part of the family of PROSOCO R-GUARD products developed to prevent the unwanted movement of water and air through building envelopes. Use FastFlash to adhere, transition and counter-flash through-wall sheet flashing. Suitable for all climates, FastFlash bonds directly to damp or dry surfaces and cures under a variety of weather conditions. It simplifies the process of producing watertight details in new or existing construction. Use FastFlash as part of a building wide R-GUARD Air & Water-Resistive Barrier system, or to complement conventional waterproofing or air barrier components. Appropriate for vertical or horizontal, above-grade applications to concrete, masonry, natural stone, structural sheathing, architectural metals, painted metals, glass, PVC, FRP, EPDM and most other building materials. Covers 15-20 square feet per sausage. Solvent-free, isocyanate-free. Complies with all VOC regulations. Silane functional polymer provides superior long-term adhesion, crack bridging and weathering characteristics. Bonds to most common building materials without priming to produce a durable, structural, weather-tight seal which is not subject to tearing or displacement when subjected to wind loads during construction. Will not tear or lose effectiveness when exposed to weather during construction. May be exposed to weather for up to 6 months without compromising performance. Single component formulation saves time and requires no mixing. Easy to gun and spread in all climates. Produces an opaque membrane when installed at the recommended 12-15 wet mils to simplify inspection and quality control. Bonds and cures in wet weather and on damp substrates. Paintable with most paints after 2 hours. Compatible with most urethane, silicone, and acrylic sealants and coatings. No shrinkage. No staining. No yellowing. Breathable - allows damp surface to dry. Will not support mold growth. Cured service temperatures: -75 degrees F to 400 degrees F.

  • To install windows, avoid the “origami” of building wrap and tapes – because if you don’t get it right, it will leak. This fluid-applied is the high-performance product used by professionals to get the job done right.
  • Use FastFlash independently or with compatible products PROSOCO Joint & Seam Filler or PROSOCO AirDam to prevent the unwanted movement of water and air through rough openings, joints, seams and penetrations. Produces a durable, weather-tight seal.
  • Bonds to most common building materials without priming, such as OSB, plywood, glass mat gypsum, magnesium oxide board (MgO), wood, galvanized steel, stainless steel, vinyl, polyvinyl chloride (PVC), concrete, masonry and anodized aluminum substrates.
  • Bonds and cures in wet weather, on damp substrates, and tolerates rain immediately after application. But, also breathable allowing damp surfaces to dry.
  • May be fully exposed to UV and weather for up to 12 months. No shrinkage. No staining. No yellowing.
  • To install windows, avoid the “origami” of building wrap and tapes – because if you don’t get it right, it will leak. This fluid-applied is the high-performance product used by professionals to get the job done right.
  • Use FastFlash independently or with compatible products PROSOCO Joint & Seam Filler or PROSOCO AirDam to prevent the unwanted movement of water and air through rough openings, joints, seams and penetrations. Produces a durable, weather-tight seal.
  • Bonds to most common building materials without priming, such as OSB, plywood, glass mat gypsum, magnesium oxide board (MgO), wood, galvanized steel, stainless steel, vinyl, polyvinyl chloride (PVC), concrete, masonry and anodized aluminum substrates.
  • Bonds and cures in wet weather, on damp substrates, and tolerates rain immediately after application. But, also breathable allowing damp surfaces to dry.
  • May be fully exposed to UV and weather for up to 12 months. No shrinkage. No staining. No yellowing.

Similar Products

Prosoco R-Guard Joint and Seam FillerAlbion Engineering B12S20 B-Line Manual Sausage Caulking Gun, 20 oz, 12:1 DriveProsoco R-Guard Air DamAlbion Engineering 935-4(3 Pack) Bent Cone Nozzle for Albion B-Line Sausage Guns, Pack of 34Sausage Caulking Gun Manual Drive with Stainless Steel Barrel by BOUSH(Silver)Albion Engineering 873-3 B-Line Cone Nozzle, Black, Pack of 10Huber ZIP System Liquid-Flash | 20 Ounce Sausage | Waterproof and Airtight Liquid-Applied Flashing Membrane B01N5CXVKA