Boveda's two-way humidity control technology - as used in the one-step calibration kit - is based on scientific principles (Raoult's law and henry's law) that have been known for over 100 years. One of those principles is that a saturated solution of salt in water will maintain a constant level of relative humidity inside an enclosed chamber. This immutable law is the foundation of Boveda. This principle is widely used and accepted by chemists and lab professionals to determine the accuracy of any hygrometer, whether digital or analog. This is why Boveda should be used to establish the correct level of humidity inside your container, package or humidor, or to check the accuracy of your hygrometer.
- Now you can perform a high and low-RH calibration for your hygrometers.
- Simply place your hygrometer inside the bag, close the zipper, and wait 24 hours. A perfectly-calibrated hygrometer will read 32% RH. If your hygrometer reads above or below 32%, adjust the calibration by the number of percentage points it is off from 32%.
- Completely maintenance free - no activation required. Easy to use.
- Exterior Bag Dimensions: 5.5" x 7" Interior Bag Dimensions: Approx 4" x 4.5"
- Lasts approximately one year, good for multiple calibrations. Shelf life before opening the pack is a minimum of 2 years.
- Now you can perform a high and low-RH calibration for your hygrometers.
- Simply place your hygrometer inside the bag, close the zipper, and wait 24 hours. A perfectly-calibrated hygrometer will read 32% RH. If your hygrometer reads above or below 32%, adjust the calibration by the number of percentage points it is off from 32%.
- Completely maintenance free - no activation required. Easy to use.
- Exterior Bag Dimensions: 5.5" x 7" Interior Bag Dimensions: Approx 4" x 4.5"
- Lasts approximately one year, good for multiple calibrations. Shelf life before opening the pack is a minimum of 2 years.