Technical Information:
Material :ABS Plastic
Video Format : NTSC / PAL / CCIR / SECAM
- Frequency respond：DC-6MHz
- Common-ode / differential-mode rejection：15HKz - 6MHz 60dB type
Video In / Out : BNC (Male) x 1 + BNC (Male) x1
Power Input :DC 12V
Audio/Data :No
Frequency Response:DC to 6MHz
Impedance :
- Coaxial cable BNC Male :75 Ω
- UTP RJ45 Data Connector :100 Ω
Working Temperature : -10°C ~ 70°C
Storage Temperature : -30°C ~ 70°C
Humidity : 0 ~ 95%
Mechanical Dimension :
- approx. 43 (W) x 22 (H) x 21 (D) mm
- approx. 1-5/8" (W) x 7/8" (H) x 7/8" (D) inch
Package includes:
8x Pair of BNC to RJ45 CAT5 CAT6 Cable Passive Video +Audio Balun Connector Transceiver for CCTV Camera
- Power + Video signals are routed via UTP and RJ45.
- The unit is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire.
- Added value of Hi-frequency signal to realize high quality image, The unparalleled interference rejection and low emissions of the unit allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant Enables cost-effective, point to point transmission appliance. Adopts Twisted Pair Wiring, providing low cost and easily obtainable.
- Provides noise interference restrain design and permitting stable images,The Max receiving and transmitting distance is 600M.
- Built-in transient protection design, needless to use a ground connection,Save cabling cost 30% ~ 50%,Without Audio / Data input.
- Power + Video signals are routed via UTP and RJ45.
- The unit is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire.
- Added value of Hi-frequency signal to realize high quality image, The unparalleled interference rejection and low emissions of the unit allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant Enables cost-effective, point to point transmission appliance. Adopts Twisted Pair Wiring, providing low cost and easily obtainable.
- Provides noise interference restrain design and permitting stable images,The Max receiving and transmitting distance is 600M.
- Built-in transient protection design, needless to use a ground connection,Save cabling cost 30% ~ 50%,Without Audio / Data input.
