Features:
· 100% brand new, high qualtiy
· Brand: TENQ Y003 Digital VHF/UHF Power SWR Meter
100% new, factory packed and never been used.
Specifications:
-MAX.POWER 120 W
-V.S.W.R 1.00~19.9
-FREQUENCY RANGE VHF (145mhz) / UHF(435mhz)
-Standing Wave COVER:100mhz~500mhz
-ONSERTION LOSS < 0.15dB(VHF) , < 0.25dB(UHF)
-TEMPERATURE 0-70 degree C.
-BATTERY 3 x AAA Type Battery or Rechargeable <2mA(Backlight Off) -INTERFACE N(SL16)
-WEIGHT <260g
Package Includes:
1x Digital VHF/UHF Power & SWR Meter 1x TENQ Hand Strap
If you can't make sure this Power SWR Meter can work on your two way Radio,
please contact " TENQ" and tell us Brand and model of your two way Radio.
* TENQ --- Focus on Two Way Radio Accessories. TENQ is a Registered brand.
Welcome wholesale Walkie talkie Accessories - Earpiece/Headset/Speaker/Battery/case/Programming cable/Antenna From TENQ.
- Connect the Output of your transceiver to "TX" and Antenna or Load to "ANT". NOTE: UV-Band meter utilize "N" type connectors; and"SL16" connectors (normally named "M" connecter) for HF-Band. Proper adaptor/cable is required if your device has different type of connectors.
- Press the red button to power on. After 2 seconds of LCD self test, it''s ready for normal measurement.
- UV-Band meter will display in sequence:"+ XXX P" (pass through power),"- XXX P" (feed back power)," XXX Γ" (SWR value), 2 seconds display for each mode. Press the red button will hold the current display. Press it again to continue the display.
- Under the environment of night or weak illumination, just press and hold the red button for 1 second to turn the blue back light on. Press and hold the red button for 1 second again to turn it off.
- 8 minutes after no power was measured, it will power off automatically. Press and hold the red button for 2 seconds to turn off manually.
- Connect the Output of your transceiver to "TX" and Antenna or Load to "ANT". NOTE: UV-Band meter utilize "N" type connectors; and"SL16" connectors (normally named "M" connecter) for HF-Band. Proper adaptor/cable is required if your device has different type of connectors.
- Press the red button to power on. After 2 seconds of LCD self test, it''s ready for normal measurement.
- UV-Band meter will display in sequence:"+ XXX P" (pass through power),"- XXX P" (feed back power)," XXX Γ" (SWR value), 2 seconds display for each mode. Press the red button will hold the current display. Press it again to continue the display.
- Under the environment of night or weak illumination, just press and hold the red button for 1 second to turn the blue back light on. Press and hold the red button for 1 second again to turn it off.
- 8 minutes after no power was measured, it will power off automatically. Press and hold the red button for 2 seconds to turn off manually.
