SOLAREZ UV Cure Clear Casting Resin (Pint) DIY Jewelry, Hobby, Craft Decoration Making - Crystal Clear Solar Cure Molding Casting Resin ~ Non-Yellowing! Cures w The Sun, Sunlamp or 385nm UV Lite;

Solarez Clear Casting UV Cure Resinis Clear Casting Resin and Catalyst all in one! Its a water-clear, UV curable clear polyester casting resin that will cure by either exposure to sunlight in roughly 3 minutes or by adding MEKP catalyst the old-fashioned way, hardening in 30 minutes. Either way, you can quickly make beautiful clear-cast parts with Solarez.

Product Tips: UV casting of parts takes into consideration many things; amount (mass) of resin to be cured, ambient temperature and surface contour of the part you want the resin to cure around. If [UV] light can reach all surfaces of your part and all the resin in the casting, you can "solarcure" with UV light only and it will take about 5 minutes - even at temperatures of -20°F. Slightly longer than with direct sunlight. WOW !! That's incredible! However, if your part has dark colors or contours that shadow light penetration, you can "dual cure" by premixing a mild amount (1%) of MEKP catalyst. The sun or artificial UV light will cure whatever areas of resin are exposed to the UV radiation and the resin will rapidly cure and gently exotherm, warming and accelerating the other shadowed areas that are bathed in the mildly catalyzed resin. Any ODOR should completely dissipate after the product is fully cured. You could also add the standard 2% dose and cure completely cure by MEKP in the shade just like the old-fashioned way and it will yield beautiful results in temperatures between 55°F to 90°F. Below that; it will cure tediously slow or not at all.

Unlike other Solarez products, Casting is NOT odorless and requires reasonable ventilation until cured. ALL Polyester resins will give off this type of odor. Clear Polyester resins are not possible without it. However, the odor ceases with curing.