TYPAR AT All Temperature Window and Door Flashing Self-Adhering 6"x75' Roll;

Typar Flashing All-Temperature (AT) is a flashing membrane specifically engineered for a broad range of temperature applications. When used properly, along with the Typar Weather Protection System, Flashing AT will provide a barrier of protection against moisture penetration at the window, doors and thru-wall entry points. Additionally, Flashing AT will assist in preventing water from penetrating the building envelope, which can lead to damaging mold and mildew growth. The aggressive synthetic block co-polymer adhesive provides maximum adhesion on OSB, plywood, aluminum, vinyl, and weather resistive barriers - even in extreme temperature conditions. Suitable for installation down to 0 degree F and thermally stable up to 180 degree F Self-seals around nail and fastener penetrations Membrane made from Typar House Wrap Capable of attaching to wet surfaces No primer required for direct-to-OSB application Split poly backer for ease of installation Resistant to UV exposure for up to six (6) months 2-Year shelf life, 10-year limited warranty No VOC, NFCC nor CFC Exceeds current AAMA 711 standards Typar flashings and construction tape play a critical role in assuring seams, edges and openings are buttoned-up to assure the highest level of system performance. In fact, sealing all joints with tape improves the wrap's performance by approximately 20%. MSRP $46.50 TYPAR Flashing AT Roll sizes 4" x 75 ft 90 Peel Adhesion (per AAMA 711-07) Butyl Rubber - Plywood 5.0 lb/in - OSB 3.8 lb/in - Facer 4.6 lb/in Mold Growth (per ASTM G-21) No Growth Application Temp 0o to 180oF Nail Sealability (per AAMA 711-07) Pass UV Stability 6 months