TST Industries Signal Plug Converters for Honda (3-2 Converters);

Honda Signal Plug Converters enable you to plug in aftermarket signals into your harness without doing any wiring. The 2-2 connectors will plug into the rear signal harness plugs on late Honda CBR's that have the two conductor plugs. The 3-2 connectors will plug into the front signal harness plugs on late Honda CBR's that have the three conductor plugs. The 2-2 also work on earlier models of Hondas on the front signals. An easy way to check if you need the 3-to-2 or the 2-to-2 model is to see if you have running lights in your front signals. If you do, you will need to get the 3-to-2 model. If you don't have running lights in the signals, then you will need the 2-to-2 model. You need to check this before ordering. (If you have running lights, you will not keep them by using these converters. The converters simply convert your 3 wire connection into a 2 wire connection). These are sold in pairs. They terminate in insulated female bullet connectors on the end opposite to the plug. If you intend to use these along with the TST Industries brand signals the fit between the signals and converter is guaranteed.