Gizmo Dorks Kapton Tape for 3D Printers 6.25" x 100';

Get this superior quality Kapton tape for 3D printers! This tape works with many different bed platforms. The beauty of Kapton tape is the ability of the polyimide film to withstand temperature. Therefore, many 3D printer users love applying this polyimide tape on 3D printers with heated build platforms. The plastic filament will have full adhesion to the polyimide film at the designated temperature, but it also has self releasing characteristics as the bed cools. Your print will be easy to pop off. Kapton tape is the practical choice for your 3D printer bed. The tape is 6.25 inches wide and 100 feet in length, so you will see plenty of uses out of one roll. The thickness of the Kapton layer is 1 Mils, and the thickness of the silicon adhesive layer is 1 Mil as well for a total thickness of 2 Mils. If you are having trouble with air bubbles, please use the wet method for application. In short, use soapy water to apply the Kapton tape, and then squeegee out the liquid. Let it fully dry before printing, and you will have smooth tape without any bubbles. Have confidence in our long lasting and durable Kapton tape.