Use to close off 6 in. Sewer & drain (S & D) pipe, in the installation of non-pressurized drainage & sewer piping systems. Pvc construction is durable, lightweight, economical & resistant to corrosion & chemicals. Hub solvent-welded connection. Maximum working pressure of 5 PSI. Made to ASTM Specifications.
- CLOSES THE END OF PIPE: As part of a complete drainage system, the PVC cap closes off the end of the pipeline to stop water flow and direct water in the system toward an open end
- MAKES SEWER & DRAIN PIPE CONNECTIONS: Caps the beginning or end of the pipeline to stop the water flow and direct water toward the open end
- WHERE TO INSTALL: Connects to end of 6 in. Sewer and Drain (S&D) pipe
- SOLVENT-WELD FOR A WATERTIGHT CONNECTION: Made of polyvinyl chloride (PVC) for Hub X Hub solvent-weld connections
- SPECIFICATIONS: Works with Sewer and Drain pipe per ASTM D 2729, D 3034, D 2751 and F 810; Not compatible with DWV Schedule 40 pipe and fittings per ASTM D 2665
- CLOSES THE END OF PIPE: As part of a complete drainage system, the PVC cap closes off the end of the pipeline to stop water flow and direct water in the system toward an open end
- MAKES SEWER & DRAIN PIPE CONNECTIONS: Caps the beginning or end of the pipeline to stop the water flow and direct water toward the open end
- WHERE TO INSTALL: Connects to end of 6 in. Sewer and Drain (S&D) pipe
- SOLVENT-WELD FOR A WATERTIGHT CONNECTION: Made of polyvinyl chloride (PVC) for Hub X Hub solvent-weld connections
- SPECIFICATIONS: Works with Sewer and Drain pipe per ASTM D 2729, D 3034, D 2751 and F 810; Not compatible with DWV Schedule 40 pipe and fittings per ASTM D 2665
