Factor 55 introduces a new line of Aluminum Hawse Fairleads. The 1.0 and 1.5 fairleads are CNC machined from 1 and 1.5 inch thick USA 6000 series aluminum bar. The industry standard fairlead thickness is .75 inches thick. Th...

Buy Now From Amazon

Factor 55 introduces a new line of Aluminum Hawse Fairleads. The 1.0 and 1.5 fairleads are CNC machined from 1 and 1.5 inch thick USA 6000 series aluminum bar. The industry standard fairlead thickness is .75 inches thick. The thicker aluminum bar results in a larger outer fillet radius for the synthetic rope to slide against. This results in less stress on the rope fibers during high angular pulls, increasing the life of your synthetic rope. The 1.0 and 1.5 fairleads are the industry's first Hawse fairleads compatible with larger ½ inch diameter rope tube thimbles. The rope slot height opening is taller to allow the larger ½" tube thimbles to pass through. There is also a machined outer corner chamfer to reduce rope stress for those than plan on using the winch as a front suspension "suck down" device. These fairleads come in a durable MIL-A-8625F TYPE III gun metal gray hard anodized finish with a machined logo. ------ For synthetic winch rope only. ------- WARNING: Always confirm that the synthetic rope cannot make contact to any sharp edges like the opening in the steel fairlead mounting plate or bumper opening. In some cases it may be required to grind this slot larger. Always sand and deburr this opening after any grinding operation.

  • CNC-machined from 1.5"-thick USA 6000 series aluminum bar with large radius opening for less rope wear and longer service life
  • Slot opening is taller to allow larger 0.5" tube thimbles to pass through
  • Durable MIL-A-8625F TYPE III gunmetal hard anodized finish is exceptionally hard; Provides low friction coefficient to extent rope life
  • For synthetic rope only; Hardware not included
  • Overall dims: 12.35" x 3.25"; Made in the USA
  • CNC-machined from 1.5"-thick USA 6000 series aluminum bar with large radius opening for less rope wear and longer service life
  • Slot opening is taller to allow larger 0.5" tube thimbles to pass through
  • Durable MIL-A-8625F TYPE III gunmetal hard anodized finish is exceptionally hard; Provides low friction coefficient to extent rope life
  • For synthetic rope only; Hardware not included
  • Overall dims: 12.35" x 3.25"; Made in the USA

Similar Products

Factor 55 Rope Guard (Ultrahook)Factor 55 UltraHook Winch Hook with Shackle Mount - RedFactor 55 FlatLink E (Expert) Shackle Mount Assembly in GrayFactor 55 Rope Guard (Flatlink)Factor 55 Fast Fid Rope Splicing ToolSmittybilt (98510 X2O Waterproof Synthetic Rope Winch - 10000 lb. Load CapacityFactor 55 UltraHook Winch Hook with Shackle Mount - GrayRhino USA Tree Saver Winch Strap 3 inch x 8 Foot - Lab Tested 31,518lb Break Strength - Triple Reinforced Loop End to Ensure Peace of Mind - Emergency Off Road Recovery Tow Rope - Unlimited Warranty!