DROK® 14.4V/14.8V/16.8V 4-Series Lithium Battery Pack Overcharge/Over-Discharge/Overcurrent/Short-Circuit Protection Circuit Board Automatic Activation;
DROK® 14.4V/14.8V/16.8V 4-Series Lithium Battery Pack Overcharge/Over-Discharge/Overcurrent/Short-Circuit Protection Circuit Board Automatic Activation

Module Parameters: Module Name: 4-series lithium battery protection board Overcharge detection voltage: 4.25 +/-0.025V Overcharge release voltage: 4.15 +/-0.05V Over-discharge detection voltage: 2.50 +/-0.08V Over discharge ...

Buy Now From Amazon

Module Parameters: Module Name: 4-series lithium battery protection board Overcharge detection voltage: 4.25 +/-0.025V Overcharge release voltage: 4.15 +/-0.05V Over-discharge detection voltage: 2.50 +/-0.08V Over discharge release voltage: 3.00 +/-0.1V Overcurrent current :20-30A Working current: 15A (natural cooling 10A, 15A if plus heat sink , Max. instantaneous current: 30A) Main features: over charge protection, over-discharge protection, short circuit protection, over-current protection. Working temperature: -40 to +85 degrees (please enhance heat dissipation when ambient temperature is over high) Wiring: Welding Output No part design on the back, can be attached to the heat sink. Package include: 1x Lithium Battery Protection Board

  • 4-series lithium battery protection board, suitable for 14.4V/14.8/16.8V lithium battery Pack.
  • Has overcharge protection, over-discharge protection, short circuit protection and over-current protection.
  • With automatic activation function, automatically cancel the protection after protection conditions recovery.
  • Connection: welding, more solid; Large current low resistance MOS pipe makes less heat.
  • No part design on the back, can be attached to the heat sink to ensure working in large current for a long term.
  • 4-series lithium battery protection board, suitable for 14.4V/14.8/16.8V lithium battery Pack.
  • Has overcharge protection, over-discharge protection, short circuit protection and over-current protection.
  • With automatic activation function, automatically cancel the protection after protection conditions recovery.
  • Connection: welding, more solid; Large current low resistance MOS pipe makes less heat.
  • No part design on the back, can be attached to the heat sink to ensure working in large current for a long term.

Similar Products

4 pcs Battery Holder,SACKORANGE 18650 Battery Storage Case Plastic Box Holder Leads with 4 Slots for 6BCP 4pcs Plastic Li-ion DIY Battery Case Holder for 4x3.7V 18650 BatteriesFinware 10 Pair XT60 XT-60 Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Batteryuxcell 50pcs 18650 Lithium Battery Double Holder Bracket for DIY Battery Pack12V 100A 4Series BMS Protection Board with Balancing for 18650 LiFePO4 Battery PackBreynet 3M 0.1 x 8 mm 18650 Pure Ni Plate Nickel Welding Strip Tape 3 M For 18650 Battery Spot Welder/Welding4A-5A PCB BMS Protection Board for 4 Packs 18650 Li-ion lithium Battery Cell 4SIcstation TP4056 Micro USB 5V 1A 18650 Lithium Battery Charger Board, with Overcharge Over-Discharge Over-Current Protection (Pack of 10)