RAZOR FACTORY ORIGINAL replacement 24 Volt (7 connector) control module for the chain driven Razor E100 & E125 (versions 10+), E150 (version 1+) and E175 (version 18+) Electric Scooters.
â–º VERSION SPECIFIC CONTROLLER which has 7 connectors (5 plastic connectors & 2 metal connectors). Throttle connection is 4 wire.
â–º IMPORTANT PRODUCT INSTALLATION INFORMATION: The E100 / E125 / E175 Series Razor Scooters are a PUSH START Scooter. In order to engage the Motor, You need to push the Scooter, and twist the Throttle!
â–º IMPORTANT PRODUCT SERIAL NUMBER INFORMATION: Model versions can be determined based on your 8-digit product ID code. The product ID code can be found on the battery cover and/or on the bottom of the frame. The last two digits are the version number (e.g. "01"= version 1, "02"= version 2, etc.) .
- ► Razor Factory Original Replacement 24 Volt Control Module with 7 connectors and 4 pin throttle connector
- ► COMPATIBLE ONLY WITH: Razor E100 - E125 Versions 10 and up, E150 Version 1 and up, and E175 Version 18 and above
- ► VERSION SPECIFIC CONTROLLER: This Control Module has 7 connectors (5 plastic connectors & 2 metal connectors).
- ► IMPORTANT INSTALLATION INFORMATION: The E100 Series Razor Scooter is a PUSH START Scooter. You need to Push the Scooter, Twist the Throttle and then the Motor will Engage
- ► IMPORTANT PRODUCT INFORMATION: Your E100 / E125 / E150 / E175 Version is determined based on your 8-digit Product Serial ID code. The Serial Number can be found below the Barcode on the battery cover and/or on the bottom of the frame. The last two digits are the version number (e.g. "01"= version 1, "02"= version 2, etc.)
- ► Razor Factory Original Replacement 24 Volt Control Module with 7 connectors and 4 pin throttle connector
- ► COMPATIBLE ONLY WITH: Razor E100 - E125 Versions 10 and up, E150 Version 1 and up, and E175 Version 18 and above
- ► VERSION SPECIFIC CONTROLLER: This Control Module has 7 connectors (5 plastic connectors & 2 metal connectors).
- ► IMPORTANT INSTALLATION INFORMATION: The E100 Series Razor Scooter is a PUSH START Scooter. You need to Push the Scooter, Twist the Throttle and then the Motor will Engage
- ► IMPORTANT PRODUCT INFORMATION: Your E100 / E125 / E150 / E175 Version is determined based on your 8-digit Product Serial ID code. The Serial Number can be found below the Barcode on the battery cover and/or on the bottom of the frame. The last two digits are the version number (e.g. "01"= version 1, "02"= version 2, etc.)
