Hydraulic Pto Pump, Speed 540 Rpm, Minimum 20 Hp, Displacement 5. 7 Inches, Inlet 1 5/16-12 Inches, Outlet Port 1 1/16-12 Inches, Shaft 1 3/8 Inches Diameter, 6 Tooth, 11. 4 Gpm @ 2000 Psi
- Prince PTO pumps have self adjusting wear plates that seal around the two unequal size gears, These plates activated by internal fluid pressure, offset wear or expansion
- All pumps are provided with an inlet port adapter (SAE O-ring boss to hose barb) and outlet port adapter (SAE O-ring boss to female pipe threads)
- Oil operating temperature should not exceed 180 degrees F; If it does, the reservoir may be too small or a heat exchanger may be needed
- Prince PTO pumps are designed to operate at up to 100% of standard PTO shaft speeds; Standard speeds are 540 rpm and 1000 rpm
- Prince pumps are designed for 2250 PSI max, relief valve setting; A relief valve, external to the pump, must be provided in the system
- Prince PTO pumps have self adjusting wear plates that seal around the two unequal size gears, These plates activated by internal fluid pressure, offset wear or expansion
- All pumps are provided with an inlet port adapter (SAE O-ring boss to hose barb) and outlet port adapter (SAE O-ring boss to female pipe threads)
- Oil operating temperature should not exceed 180 degrees F; If it does, the reservoir may be too small or a heat exchanger may be needed
- Prince PTO pumps are designed to operate at up to 100% of standard PTO shaft speeds; Standard speeds are 540 rpm and 1000 rpm
- Prince pumps are designed for 2250 PSI max, relief valve setting; A relief valve, external to the pump, must be provided in the system
