This is the wired Winch Control Unit offered to allow operation function from your radio and receiver. This will allow you to control a winch with your remotes third channel. Specifications: Receiver Small Compact Size , Operating Voltage 6V to 11.1V, Requires 3 position Third Channel, Easy Plug and Play, Instruction Included, Length: 1.6 / 41mm, Width: 1.2 / 31mm, Height: 0.39 / 10mm, Weight: 0.35ozes / 10grams, Wire Length: 6 / 150mm, Wires Weight: 0.14ozes / 4grams. What's Included: 1x Wired Control Unit 1x 6" Receiver/Receiver Power Wire 1x 6" Receiver/Winch Control Wire Optional Parts: Warn 1/10 9.5cti 1/10 (Z-S1079) For Shorter Wires 3" Wiring Pack (Z-S1001) For Longer Wires 9" Wiring Pack (Z-S0999) Replacement parts: Spare Empty Case for Wired Control Unit (Z-S0808) Notes: You will need a radio with a third channel to operate this controller. Your third channel needs to be a three position switch (on/off/on). If your radio does not have a three position switch, you can purchase a wireless controller unit. (Z-S1092) This product is not waterproof. You may be able to waterproof on your own, but this will void the manufactures. For Warnings, Precautions, Safety and Damage Limits: Click Here If for any reason you cut the wires on the control box, this will void the . Some Lipo battery voltage can be higher than 11.1 volts. Please be careful and check voltage before using your battery.
This is the wired Winch Control Unit offered to allow operation function from your radio and receiver. This will allow you to control a winch with your remotes third channel. Specifications: Receiver Small Compact Size , Ope...
Similar Products
